3 Most Used and Underused Mods on your Cybertruck?

[Trekboy]

Initially I had them set up in standard mode, but they looked horrible with a huge gap:

I tried without the beadlock plate, and they looked kind of neat this way, but decided I wanted to go full beadlock:

So I found a place that would install in beadlock configuration, and they look much better now:

I'm very particular about checking the bolt torque regularly, but I'm not doing beast mode launches in this mode. It's nice that the truck tells you the PSI of each tire so you can verify tire pressure regularly. I will use them mainly for winter/snow/occasional offroading and switch to standard tires/rims/aerocovers during the summer months.

Are those 18" or 20"? edit: Nevermind...I zoomed in and saw they were 18s. Very nice.

Sponsored

 

[TexasRaider]

Aftermarket LED $1000 light bar.
Not worth it. (However, the Amber ditch lights - definitely worth the price.)

 

[affinity]

Most used

1. Molle rack system from @CYBERTRUCKco

it enables all the setup for me

2. Under rack storage table
(video link for unmounting table)

its thin and sleek design perfectly matches to Cybertruck and saves space

3. L track mount plate

I can mount any accessories ta easily accessible location and don't have to crawl into the bed with it.

Underused
1. Vault Cargo Divider
2. Underseat storage

 

[getsometom]

Most used:
1. Stainless steel silhouette license plate frame although I am biased toward using it. The design fits the CT's aesthetic with a subtle nod toward the emblem. There's also a Cyberbeast version.
https://makerspacedude.etsy.com


2. EVVida/BestEVMod's rear underseat storage. It's less expensive than the Tesla version and has a middle area with a stretchable net to hold smaller objects while driving. Since the CT barely fits in the garage, I cannot keep the garage door closed and open the tailgate. This is where I put groceries for easy access after parking in the garage.
https://ev-vida.store/products/rear-underseat-storage-for-cybertruck-2024?rs_ref=xFvJg2cX

3. EVVida/BestEVMod's front underseat drawer biometric safe. Great place to lock up valuables and/or a handgun for safety. Easily accessible while seated in the driver or passenger seat.
https://ev-vida.store/products/front-under-seat-drawer-safe-for-cybertruck?rs_ref=xFvJg2cX

Underused:
1. Tesla's vault divider
2. Frunk net since I keep a soft cooler in there all the time.

 

[Mark2sday]

I don’t understand the triangle door closers. If you gently push the door outward, it will recoil back and then there’s already a thick piece of foam that you can easily use to grip the door to finish the close. It works great every time. but like the triangle door closers, be sure to get your fingers out of the way before the door complete’s the closing process.

 

[swengl]

I don’t understand the triangle door closers. If you gently push the door outward, it will recoil back and then there’s already a thick piece of foam that you can easily use to grip the door to finish the close. It works great every time. but like the triangle door closers, be sure to get your fingers out of the way before the door complete’s the closing process.

I would agree with you, as a daily driver. I could see the advantage for passengers that are not as familiar with the truck.

 

[Beerman2011]

In contrast to some others, I love my molle sail panels, but have never used the Tesla bed divider (because it doesn't work with my bed liners). Anybody want to buy one?

My sail panels have things like a first aid kit, a trenching tool, fire extinguisher with quick disconnect, pack of tie downs in a molle bag, tool kit, etc. That way they don't take up room in the smugglers hatch and they don't take much width (most are mounted high).

Daily I use the Magsafe power for my iPhone mounted next to the screen. I needed to Frankenstein it from 2 kits so that it securely held onto the corner just how I wanted it, so it is immediately next to the screen. Allows me to do things like compare Waze and Tesla maps. Doesn't overheat my phone like the console charger.

Bed liners. I know many feel that the CT bed doesn't need them, but I worry less and they are easy to clean. I have had everything from lawn debris to dead deer in the back and I don't worry about scratching anything or cleaning them.

When I received my CT (September) it still meant the bed cover leaked - particularly at top. Some foam on the corners (after removing the trim piece) and some clear caulking means no more leaks.

Least used.
1. Aforementioned Tesla bed divider - never used, out of the box once.
2. Hannshow Lightbar - but like someone else mentioned, I would buy again in a heartbeat - I just don't need it often.
3. Tesla cover. I waited to use part of my voucher on it, but I have never had it out of the box. Maybe if I trailer the CT sometime.
4. Dog seat cover. Another voucher purchase, but I still haven't had the dogs in the CT in 4 months. Sorry doggies - you can go in the Expedition!

 

[alsetkcurt]

These are the three things I love. Well, there are more than three really. Here goes.

1. CYBERTRUCKco Billet Aluminum LOCKING Wheel Caps (Set of 4pcs) : they fit the bill. They look awesome and are built really well.
2. CYBERTRUCKco Universal Front Fog Light Mounting Brackets : have some really awesome lights in yellow mounted up front. Really helps cut through the fog in SoCal.
3. CYBERTRUCKco Modular Utility Bed Rack System and Mounted BadAss Pop-Up Tent : there’s nothing else like it. Streamlined and well built.
   
4. Jowua 6D Phone Mount : It's the perfect area for keeping my phone in direct eye view while driving for Waze.
5. EV-Vida Lower LCD Screen Organizer : Just love having something to store "stuff" on the go.

Things I don’t use:

1. Tesla Utility Bins : I have them in my bed at all times but really have yet to utilize them. They are flimsy and the lids aren’t water proof. There are so many better options. The one thing I like is that they fit in the grooves of the bed.
2. Tesla Rear Seat Bin : I use it but not that much. Primarily for securing / hiding stuff while I'm away but that's it.

Here are some other pictures that I've taken at the beach while day camping.

 

[MoabChris]

I've seen this topic on other forums it's led to some good fun discussion.... so share your 3 most used and underused mods!

Most used mod #1 is roof rack from cybertruckco.com that sits on #2 and #3. Heavy duty and carries my spare tire (not in the bed) .

The second most useful mod is my under drivers seat safe. Securely store self defense items. Fingerprint reader and quick access.
The one in the center console . It is to difficult to access quickly.

Third item is center console storage with additional cup holders... that's tied with my black and white seat covers....


Useless mods might be the external mirror covers....meh. and nets for the bed.

 

[Pulaski]

Most used

1. Molle rack system from @CYBERTRUCKco

it enables all the setup for me

2. Under rack storage table
(video link for unmounting table)

its thin and sleek design perfectly matches to Cybertruck and saves space

3. L track mount plate

I can mount any accessories ta easily accessible location and don't have to crawl into the bed with it.

Underused
1. Vault Cargo Divider
2. Underseat storage

Thanks for the L Track link. They have a lot of great stuff! I see your axe is on their mounting plate, but what are you using for the actual axe holders? Nice setup man.

 

[MoabChris]

Builtright industries has a molle panel bracket that works great with monkey fists.

 

[alsetkcurt]

3. L track mount plate

I found the Axe on Amazon and it's on sale for 33% off but what holder is it on? Awesome setup!

 

[Keto Lifestyle]

Number one: A Swiffer mop. To clean the windshield. I’m 6’3” and there is no way I can reach. The microfibre fits in the tabs nicely.
Number two: Under the seat storage bin. I use it daily.
Number three: My cargo divider. I bought mine from Tesla. I think they modified it. Undo a couple of screws on the bottom spacers to fit over your cargo mat. I can strap water jugs and propane tanks securely.
For cleaning, I use spray foam and spritz ONR and dry. No more finger prints.

 

[brendah369]

I’ll start with 1 or 2 of each:

By far the most used mod I’ve made is the 3d printed cyber triangle looking door closers I affixed to all 4 doors. Has drastically reduced prints and smudges. I use them much more than I thought I would. I did design my own to save a few bucks, but they look like everyone else’s.

I also use my molle bed divider a lot. I have it in the position just behind the smugglers bay opening, so I can still use that. I printed some small hooks that someone here posted, that are handy with grocery bags. It’s nice so as it stops soda can boxes or large Costco orders from sliding around or having to be tied down.

This is a given, but now more and more non foundation owners are coming in. The d rings in the floor and tie down points on the bed rails get used constantly. Along with some cheaper tie downs from harbor freight. The pull-to-tighten ones. Not ratchet. I use my bed constantly and this has already set it far apart from the trail boss it replaced. Extremely practical.

Least used is are the inside sail molle panels. They look cool I guess. Not really actually. I don’t have anything I need attached there at all times. And the molle holes are too small for my tie down hooks. The amount of force they can withstand from things pulling on them is small too. I use the bed for big items a lot, so stuff there would get in the way. I wish I hadn’t bought them, but used my voucher so it’s whatever.

I also don’t use the frunk net thing very often.

Would you please share the #D print file for the hooks?

 

[Ddanis60]

Would you please share the #D print file for the hooks?

I want to make sure to credit the creator. Here is the thread. 1st post has the link. It’s a free download. I printed 6 or 8 and they work great. Very secure, once in. In the cold Midwest here, I did snap one by overloading it, but it was my fault.

https://www.cybertruckownersclub.co...rtruck-molle-panel-bag-hook.28713/?_appload=1

Sponsored