3D Printer Files for Cybertruck items?

[Seribus]

Yep. Let me dig around and find it. I ended up putting the text along the angle on the top. I'll send you both to play with.

Sponsored

 

[BoKristensen]

If you do end up getting the kit and printing one, and find you have a hard time getting it to levitate, you’re not alone.
what I’ve found was there is an initial orientation that opens the door to levitation. Eventually, you will find the one that applies to your situation. For example, mine is “the power plug is at 1 o’clock, and the rear of the CT is at 9 o’clock. “ Once I found the initial orientation that works for me, it was much easier to get to it levitate. Mine has been floating for over three days so far! Good luck!

Great to know. Thanks for the heads up. I'm going to order parts for the print and give it a go.

 

[TickTock]

Just in time for June.

 

[dalton108]

Just in time for June (I ran out of colors - will probably print again when I get my cyan and violet filament order...)
View attachment 97647

Superb! I would need some caveats added to the love side for mine but … ?

 

[TickTock]

True. Probably need a little asterisk down beside the "all"

 

[TickTock]

Just in time for June (I ran out of colors - will probably print again when I get my cyan and violet filament order...)
View attachment 97647

I finally uploaded the model here:
https://www.printables.com/model/1320196-cyberbeast-pride-month-dei-plate-frame

My daughter asked me to make one for her, too, so here is a generic (non-cyberbeast) version:
https://www.printables.com/model/1320695-pride-month-dei-license-plate-frame

 

[CyberBrady]

1st post, I come bearing (free) gifts. Enjoy:

Rearview mirror delete cap - Blank or Cybertruck logo

AirPods Pro charger cradle

 

[CyberBrady]

Added another AirPods holder at same link above.

Working on inner door handles... will post when complete.

 

[AverageJoe]

Thank you everyone. Much to print now

 

[TeslaKen]

Here is the zip file containing the files you need to print the camera housing for the Hansshow V2 rear camera that comes with the latest rearview mirror:

HansshowRearviewCameraEnclosureV2.zip

 

[AverageJoe]

Door pockets https://cybertruckco.com/product/front-door-handle-pocket-inserts-free-download/

Do you have files for the rear?

 

[CYBERTRUCKco]

Do you have files for the rear?

no, sorry, we did the fronts with intent to make and sell parts, but then they were on Amazon from China as we were about to start tooling.... so we abandoned that project and then just decided to give them away for free.

 

[AverageJoe]

That's ok. Still appreciate the fronts.

 

[CyberBrady]

Finished them, enjoy: Cybertruck Door Handles

 

[AverageJoe]

That's to bad. Your front ones fit better than others.

Sponsored