So the "noText" version isn't thin enough and still blocks some of the plate text? If you tell me how much to reduce it to, it is an easy edit.
Actually the no text version should work, I downloaded this STL file and it turns out my printer (Bambu Carbon X1) doesn't print that wide and would have to break the frame up in 2 parts.So the "noText" version isn't thin enough and still blocks some of the plate text? If you tell me how much to reduce it to, it is an easy edit.
It is too big to print in one piece on mine, too. Go to the files tab. You will see there are three files for each style: one file with the entire frame if your printer will support that and two other files so you can print in in two parts on a typical 25cm bed.Actually the no text version should work, I downloaded this STL file and it turns out my printer (Bambu Carbon X1) doesn't print that wide and would have to break the frame up in 2 parts.
Got it, I downloaded the 2 halves. In your picture on the Printables site it shows a black frame with a white Cyberbeast logo at the top, the print file looks like it is all one color, I'm assuming I have to adjust something on my end to get the beast logo in a different color?
Read the description. All print settings, color change instructions, and file descriptions are there.
I did read it but sadly the words you used do not align with the words in the software that came with the Bambu printer, plus this is my first week with the printer so while I can look for words like "infill angle" and not find them, I might find "infill" but then it is a number not a color, like a measurement but not an angle, so I don't know if it is right or wrong to change.
To print, set layerheight to 0.2 and change color at 0.6 (It's at this point, you'd load in the white filament to print the beasts)
I figured out how to do it in the Bambu software, at .2 I had it change colors (I used yellow) and then at a later height I went back to black. Seems to have worked for part 1, about to try part 2...
Wow. That's nice. I have an Ender printer. I'm going to give it a try this weekend. Haven't set it up after the move here to Maryland.Here is the output!
I placed two orders for this and no link was sent.
