Appliqué Vehicle Studs/Posts

[Hookalakupua]

Hey Everyone,

Trying to confirm whether there should be bolts on the stud posts under the 8 appliqué doors used for mounting crossbars. I believe the thread pitch of the studs is M6-1.0 but our truck came without any nuts attached to them. I’ve got the CT with the service center now for other issues and they’re claiming they don’t come attached or with the truck.

Thanks!

Sponsored

 

[Swalltr]

the mounts above the cab have them, the mounts to the side of the bed do not. At least with my FS beast that was the case

 

[Hookalakupua]

Thank you! Looking forward to the response of others as well as sounds like it’s probably not uniform.

if anyone has a picture of theirs attached, I would be very grateful. Cheers

 

[CT_AZ_4x4]

the mounts above the cab have them, the mounts to the side of the bed do not. At least with my FS beast that was the case

Same. FS AWD.

 

[CYBERTRUCKco]

the mounts above the cab have them, the mounts to the side of the bed do not. At least with my FS beast that was the case

this on all CT's.

Sponsored