Forward cameras inoperative after getting wrap

[Gigahorse]

How do I do a reset Crissa?

Did the reset fix your cameras that were not working?

Sponsored

 

[CyberGus]

How to get to the secret service menu?

https://service.tesla.com/docs/Public/Diagnostic/

TL;DR: Hold down the "Model" badge in the Software menu until prompted for a password, use "service".

You can reset the screen by holding down both scroll wheels. You can even do this while in motion but it's disconcerting to have a black screen hahaha.

To "reboot", go to Controls > Safety > Power Off, wait two minutes (don't touch anything or open the door) and then press the brake pedal to wake it up. Note that Sentry mode must be disabled first.

 

[CTInProcess]

As long as the wrapping company is aware then you can send them the bill if they screwed something up. Set a service appointment, sometimes they are able to tell you on the app what exactly is wrong and can give you guidance on how to fix it.

If it requires a SC appt and they give you an estimate to repair, you know where to send that bill for payment.

 

[DavidL]

Thanks for all the advice! Last night, the cameras must have reset and I have forward cameras now and cruise control.

 

[CyberFreak]

Just out of curiosity what did they charge for the wrap? And was it vinyl or PPF?

 

[DavidL]

$2900. I used Avery but they gave me a choice of Avery or 3M.

 

[Blu_Beauties]

FYI, I had the same truck from the wrap shop. All you need to do is go into the service options and select “camera calibration” & within 15 seconds the cameras came back on for me.

Sponsored