Hansshow V2 to replace V1 (rear view mirror)

[ABILISK]

Yes very much so.

It was contentious? Who didn’t like the big bed cannon?

Sponsored

 

[TeslaKen]

It was contentious? Who didn’t like the big bed cannon?

The group hosting the car show in conjunction with NDEW (National Drive Electric Week) thought that the weapon on the back would trigger people and cause disruption at their car show. There is a prior thread on it here somewhere from last summer/fall.

 

[TeslaKen]

Here is the old (Locked) thread https://www.cybertruckownersclub.co...lp-locked-due-to-politics.49228/post-30681321

 

[Banker]

Thanks for the heads up on the speakers.
I will ask pre ordering

There is a v2 and what some people call a v2.5, which has the front facing camera built into the mirror instead of external mount. Just a heads up, there is a problem with the wire harness on the new v2 one where it knocks out one or two of your passenger speakers - they have said they are working on fixing the problem but other users and myself have not been able to get a resolution for months. The files for the housing are on Makerworld, but you're probably better off buying it from hansshow if you buy the mirror, its an extra $10..
I believe @TeslaKen has an install video on it, I'll let him take it from here and give you the link.

sent chat and email re resolution to speaker issue… no response yet.

 

[ABILISK]

The group hosting the car show in conjunction with NDEW (National Drive Electric Week) thought that the weapon on the back would trigger people and cause disruption at their car show. There is a prior thread on it here somewhere from last summer/fall.

That’s some BS. People get so offended by the simplest things. The big bed cannon is sick.

 

[That Beast Mode]

That’s some BS. People get so offended by the simplest things. The big bed cannon is sick.

Yeah it was an earlier thread, they didn't want to let him enter because the people were "feeling threatened" by the big bed cannon and somehow felt like it was going to explode in their face or cause a riot. You'd think he was rolling up there with a real grenade launcher.

 

[mitch9]

TeslaKen has a nice article on installing the Hannshow V2:
https://halocybertruck.com/article-...nsshow-v2?blogcategory=Interior+Modifications

He also has an article about powering it from an alternative source, the rear screen in the center console, he taps the +12 for it, this bypasses the Speaker not working and multiple downstream devices plugged in not getting power:
https://halocybertruck.com/article-list/f/cybertruck-12v-power-tap-for-accessories

TeslaKen, love your site

Mitch

 

[Banker]

Thanks for the heads up on the speakers.
I will ask pre ordering

sent chat and email re resolution to speaker issue… no response yet.

on hold till there is a speaker solution
Chat Gpt says:


Known Speaker / Audio Problems

• Factory speaker dropout: The mirror’s wiring harness does not pass through power to the factory A-pillar/B-pillar tweeter speaker properly. Many owners have noticed that the tweeter stops emitting sound after installing the mirror, even though other speakers work fine. This is because the harness isn’t supplying power/data through to that circuit.

 

[That Beast Mode]

Thanks for the heads up on the speakers.
I will ask pre ordering

sent chat and email re resolution to speaker issue… no response yet.

I wouldn't expect one either. Its been months and I've barely gotten more than 2 sentences of customer service replies.. keep us posted if you do get any info out of them.

 

[mitch9]

No wiring harness solution is really needed, just wire it to a +12V source, as shown in TeslaKen's video/article. It's not a big deal..

 

[TeslaKen]

TeslaKen has a nice article on installing the Hannshow V2:
https://halocybertruck.com/article-...nsshow-v2?blogcategory=Interior+Modifications

He also has an article about powering it from an alternative source, the rear screen in the center console, he taps the +12 for it, this bypasses the Speaker not working and multiple downstream devices plugged in not getting power:
https://halocybertruck.com/article-list/f/cybertruck-12v-power-tap-for-accessories

TeslaKen, love your site

Mitch

Thank you for the kind words! I am glad you find it useful, it is why I make those articles, I want to gove back to the community.

 

[leeboy4130]

I bought a camera for 100 bucks and printed a housing for the roof.

Link? Where did you power it from?

 

[Cosmos78]

Link? Where did you power it from?

I took power from the 12 volt cigarette lighter. I bought it in this store https://www.ozon.ru/product/videore...=K8tZWnrK8ikPK08LtpJng6Eil5R2V4hL7ow7KIX37q6K

 

[FL370]

on hold till there is a speaker solution
Chat Gpt says:


Known Speaker / Audio Problems

• Factory speaker dropout: The mirror’s wiring harness does not pass through power to the factory A-pillar/B-pillar tweeter speaker properly. Many owners have noticed that the tweeter stops emitting sound after installing the mirror, even though other speakers work fine. This is because the harness isn’t supplying power/data through to that circuit.

Same here. Let us know if it is fixed.

 

[Legend_]

I have the Hansshow 2.5 and have zero issues.

Sponsored