Introducing T Sportline CTX Extreme Duty Front Bumper with Integrated Winch (High-Output) & Lighting

[CyberNickOH]

Is everything really addable after the fact? Looks like the bumper is slightly different if you have a winch or not. I need none of this, but want it all. So if I need to do the winch from the get-go, I guess I'll just "have" to do that.

Make some fender flares, fully replacing rock rails (no more plastic) and a rear to match. Xmas presents for myself done.

Sponsored

 

[Derektsla]

Okay, we normally don't list things until we're officially in production and have costs and timing firmed up, so this is a little early to share - but I get your point, you want to commit to a package. Here is a rendering of our bull bar - I should have it listed on the site for pre-order over the next couple weeks, it's not that far out! The body kit will be up this week too, FYI....and there is more coming beyond those ?

Lots of Respect for showing this. I know it’s hard to show products early. Especially when you are guaranteed to get people saying they don’t like what you about to release! (I have been there)

at first look, I really like this. It checks several things I wanted.
1. NOT round bars. (So the style fits.)
2. Enough coverage without looking bulky.
3. Enough mounting points to make it seemingly strong enough to push something out of the way. I was skeptical on ones not mounted on the edges that may bend.

Thanks for being willing to share!

 

[T Sportline]

Is everything really addable after the fact? Looks like the bumper is slightly different if you have a winch or not. I need none of this, but want it all. So if I need to do the winch from the get-go, I guess I'll just "have" to do that.

Make some fender flares, fully replacing rock rails (no more plastic) and a rear to match. Xmas presents for myself done.

Yes -

The bull / brush guard is add-on design protected / so it's safe to add it down the road. The base bumper is the same!

The winch is add-on design protected / so it's safe to add it down the road. The base bumper is the same!

 

[T Sportline]

Lots of Respect for showing this. I know it’s hard to show products early. Especially when you are guaranteed to get people saying they don’t like what you about to release! (I have been there)

at first look, I really like this. It checks several things I wanted.
1. NOT round bars. (So the style fits.)
2. Enough coverage without looking bulky.
3. Enough mounting points to make it seemingly strong enough to push something out of the way. I was skeptical on ones not mounted on the edges that may bend.

Thanks for being willing to share!

Thanks, and you nailed it! 1, 2, 3 are all on our product definition outline! Exactly what we're shooting for.

Round tubing has no place on Cyber....

 

[CyberNickOH]

How is the battery charged?

 

[Derektsla]

Thanks, and you nailed it! 1, 2, 3 are all on our product definition outline! Exactly what we're shooting for.

Round tubing has no place on Cyber....

Placed my order. Excited for this!

 

[T Sportline]

Placed my order. Excited for this!

Awesome, we're excited to get you setup!

 

[CyberNickOH]

Got my order placed with 8 pod HXB lights. Looking forward to it.

 

[Alexander S.]

Okay, we normally don't list things until we're officially in production and have costs and timing firmed up, so this is a little early to share - but I get your point, you want to commit to a package. Here is a rendering of our bull bar - I should have it listed on the site for pre-order over the next couple weeks, it's not that far out! The body kit will be up this week too, FYI....and there is more coming beyond those ?

Hello, please tell how the length of the Cybertruck will change when installing the bumper and Bull bar. Is it possible to make the the upper part of a bull bar wider so that it also covers the side parts. Thank you

 

[T Sportline]

Hello, please tell how the length of the Cybertruck will change when installing the bumper and Bull bar. Is it possible to make the the upper part of a bull bar wider so that it also covers the side parts. Thank you

The bumper is about 6" out from stock on the top edge. The bull bar doesn't extend further.

 

[Alexander S.]

The bumper is about 6" out from stock on the top edge. The bull bar doesn't extend further.

Hello,

Thank you for your reply. In the case of the 6 inches longer, I will have half an inch from the bumpers to the door and front wall.

T-Sportline Bull bar in “Cybertruck style” with sharp edges, in my opinion, looks not only ugly but also dangerous. There will be knives lying in front of your vehicle, and in the event of an accident, someone will get more serious injuries and you will get a few extra years in jail.

Also, T-Sportline Bull bar is not effective in collisions with animals. I mostly drive at night and have encountered 7 deer and several turkeys. In all cases the sides of the vehicle, fenders and front headlights were hit. After I bought a front bumper and bull bar from Iron Cross automotive (see photo) and the other collisions did not damage my Tundra.

I talked to a welder and he said he could weld a wide round bull bar to the T-Sportline bumper. The price is about 500-600.

 

[T Sportline]

Hello,

Thank you for your reply. In the case of the 6 inches longer, I will have half an inch from the bumpers to the door and front wall.

T-Sportline Bull bar in “Cybertruck style” with sharp edges, in my opinion, looks not only ugly but also dangerous. There will be knives lying in front of your vehicle, and in the event of an accident, someone will get more serious injuries and you will get a few extra years in jail.

Also, T-Sportline Bull bar is not effective in collisions with animals. I mostly drive at night and have encountered 7 deer and several turkeys. In all cases the sides of the vehicle, fenders and front headlights were hit. After I bought a front bumper and bull bar from Iron Cross automotive (see photo) and the other collisions did not damage my Tundra.

I talked to a welder and he said he could weld a wide round bull bar to the T-Sportline bumper. The price is about 500-600.

Okay, it's all subjective - we get that. If you want a round tube bar on Cyber, that's cool too! Our bumper is mod-friendly, so yes, you could certainly fab your own bull bar and bolt it on too!

 

[Alexander S.]

Okay, it's all subjective - we get that. If you want a round tube bar on Cyber, that's cool too! Our bumper is mod-friendly, so yes, you could certainly fab your own bull bar and bolt it on too!

Hello, as for me no difference who will receive my money for the Bull bar, but if you made the best bumper on the market for Cybertruck, I think you can make and the best bull bar too. You can actually make two versions of the Bull bar, a “light protection” like you have in the picture and a “maximum protection” for off-road. I can send you a draft of what I want and so I think you will improve it.

I will save time if I get the bumper with the Bull bar on it. So, it would be better for me to get it all together.

 

[Troye]

Hey Cybertruck Nation -

I am excited to announce our new CTX Extreme Bumper for Cybertruck! Our team has been long at work on this and I must say, it turned out amazing! Our produvt and engineering team have invested countless hours spent designing, optimizing, and finalizing this design and the exclusive features. For instance, adding and powering a real 12,000 winch and the ability to outfit with ANY lighting package is no small task!

Beyond the attractive rugged looks, OEM+ design language, meaningful features and benefits....this bumper is properly engineered and manufactured to lead the pack! We are now posted officially for pre-order and plan to start shipping before year end. This is the first of several complimentary / adjacent products in this new CTX lineup from T Sportline.

Our product listing is very detailed, you'll find specs and details about the bumper and available options. The configurator will allow you to mock-up power, winch, and lighting options - dial in a build that suits your needs and budget.

Product page:
https://tsportline.com/products/tes...ront-bumper-with-integrated-high-output-power


Read about it in depth on the product page, here are a few highlight specs:

• Designed with optimized load path integration to Cybertruck
• CAD designed and CNC-Press Bent / Fixture Welded
• 10 Gauge Alloy Steel with Inner Cross-Gusseting
• Integrated Hi-Lift Jack Points
• Retained Cybertruck Camera and Bluetooth Module
• OEM Tow Hook
• Triple coat finish - Phosphated / e-coat / textured black powder coating
• Integrated LED lighting options
• Integrated winch heavy duty mount subframe and add-on winch options
• ~165lbs - Weight (not including winch or power unit)

Do you have an installation video?

 

[T Sportline]

Do you have an installation video?

Should have that posted soon, it's in the works!

Sponsored