L-Track compatible frunk mat??

[Salty_Cobalt]

I was wondering if anyone is aware of a frunk mat that has precut holes for use of the Tesla L-Track and cargo net. I keep my tool bag in my trunk held in place by the cargo net, but it's causing my frunk to get scratched up. Of course, I could always just cut holes in any compatible mat, but it wouldn't be a clean look... So I'm trying to see if there's a product out there already that I just can't find?

Sponsored

 

[ABILISK]

You don’t like the gear locker?

 

[That Beast Mode]

I was wondering if anyone is aware of a frunk mat that has precut holes for use of the Tesla L-Track and cargo net. I keep my tool bag in my trunk held in place by the cargo net, but it's causing my frunk to get scratched up. Of course, I could always just cut holes in any compatible mat, but it wouldn't be a clean look... So I'm trying to see if there's a product out there already that I just can't find?

I ended up cutting out rectangles in mine so I can use both. With a sharp blade it was fairly easy. Once you install the net it looks fine, if you really want to be precise you can use a ruler or something to get perfectly straight cuts, I kinda free handed it. I needed to trim my mat anyway because it didn't sit on the floor of the frunk without scraping the sides, so regardless I had to trim the edges and figured why not.

 

[hemiarch]

I ended up cutting out rectangles in mine so I can use both. With a sharp blade it was fairly easy. Once you install the net it looks fine, if you really want to be precise you can use a ruler or something to get perfectly straight cuts, I kinda free handed it. I needed to trim my mat anyway because it didn't sit on the floor of the frunk without scraping the sides, so regardless I had to trim the edges and figured why not.

Is the l-track fitting on the net long enough to allow the extra thickness?
Could you please post a picture as a guide for how to do this?

 

[That Beast Mode]

Is the l-track fitting on the net long enough to allow the extra thickness?
Could you please post a picture as a guide for how to do this?

Yeah, it fits no problem. I marked where the brackets are underneath the mat, (remove the bracket covers, put the mat in and push down on the area so you can feel where it depresses in over the track, mark it and cut out a small square to open it up so you can see underneath and mark the width) then I kept enlarging it until it was the width and length of the cargo net track mount. I'll post a picture for you tomorrow when I'm home.

 

[TeslaKen]

Yeah, it fits no problem. I marked where the brackets are underneath the mat, (remove the bracket covers, put the mat in and push down on the area so you can feel where it depresses in over the track, mark it and cut out a small square to open it up so you can see underneath and mark the width) then I kept enlarging it until it was the width and length of the cargo net track mount. I'll post a picture for you tomorrow when I'm home.

I did the same and it works great

 

[NEK2MO]

I ended up cutting out rectangles in mine so I can use both. With a sharp blade it was fairly easy. Once you install the net it looks fine, if you really want to be precise you can use a ruler or something to get perfectly straight cuts, I kinda free handed it. I needed to trim my mat anyway because it didn't sit on the floor of the frunk without scraping the sides, so regardless I had to trim the edges and figured why not.

I did the same thing, I don't have the OEM frunk L-tracks but have installed a cargo net along with a frunk mat. The mat is easy to cut using a sharp blade.

 

[hemiarch]

I did the same thing, I don't have the OEM frunk L-tracks but have installed a cargo net along with a frunk mat. The mat is easy to cut using a sharp blade.

Very cool looking.Clean. Appears factory. I think in my case I’d want to expose the whole l-track so I could potentially use it for other things too.
I have a 3d maxsoider mat in there

 

[That Beast Mode]

Is the l-track fitting on the net long enough to allow the extra thickness?
Could you please post a picture as a guide for how to do this?

Hey here's the photos you wanted. Hope it helps.

 

[Gigahorse]

Razor knifed it myself, pretty happy with result

 

[btcrealm]

Is the AbstractOcean frunk l-track the same dimensions as the Tesla frunk l-track? I've just ordered the AbstractOcean one. I've had a frunk net for a while but the connection points are dying.

 

[hemiarch]

Razor knifed it myself, pretty happy with result

I love that. Only reason I haven’t tried to replicate it yet is that I haven’t been home.

 

[AO-Pete]

Is the AbstractOcean frunk l-track the same dimensions as the Tesla frunk l-track? I've just ordered the AbstractOcean one. I've had a frunk net for a while but the connection points are dying.

It is.

 

[Salty_Cobalt]

You don’t like the gear locker?

It's cool, but doesn't fit my needs unfortunately=\

 

[Salty_Cobalt]

Hey here's the photos you wanted. Hope it helps.

Looks great, but my OCD would mean if have to have perfectly straight lines...lol.

Which frunk mat is this?

Sponsored