Sponsored

Using your Cybertruck as a home charger -- battery life concerns?

OP
OP
dalton108

dalton108

Well-known member
First Name
Dalton
Joined
Oct 17, 2020
Threads
132
Messages
3,990
Reaction score
7,994
Location
USA
Vehicles
‘24 FS/CB; ‘24 MX; ‘23 MS PLAID (Prior: ‘20-MY; ‘21-M3P) (Also: ‘14-FJ; ‘21-C8)
Occupation
Lawyer
Country flag
Yes, using mobile connector.

Also, have two wall connectors waiting to be installed (trying to get those installed is how I discovered the issue in the first place - shockingly didn’t come up in the inspection).

I know what the mobiles “should get” but again, critically my panel is maxed out and in fact overloaded. So, 3mph sometimes less. Far from ideal.

My dad’s a retired electrician and I used to be an OSHA compliance officer and administrator, so I understand this is ungud.

We’ll get it sorted.
Sponsored

 
Last edited:

Woodrick

Well-known member
First Name
Ed
Joined
Dec 30, 2023
Threads
6
Messages
4,786
Reaction score
4,762
Location
Gainesville Ga
Vehicles
Model 3, Model Y, Cybertruck AWD
Occupation
Consultant
Country flag
Yes, using mobile connector.

Also, have two wall connectors waiting to be installed (trying to get those installed is how I discovered the issue in the first place - shockingly didn’t come up in the inspection).

I know what the mobiles “should get” but again, critically my panel is maxed out and in fact overloaded. So, 3mph sometimes less. Far from ideal.

My dad’s a retired electrician and I used to be an OSHA compliance officer and administrator, so I understand this is ungud.

We’ll get it sorted.
What's the numbers that I asked for?
Just because your panel may be maxed out isn't a reason that you are only get 3 mph.
By seeing the numbers, the issue can be diagnosed.
 
OP
OP
dalton108

dalton108

Well-known member
First Name
Dalton
Joined
Oct 17, 2020
Threads
132
Messages
3,990
Reaction score
7,994
Location
USA
Vehicles
‘24 FS/CB; ‘24 MX; ‘23 MS PLAID (Prior: ‘20-MY; ‘21-M3P) (Also: ‘14-FJ; ‘21-C8)
Occupation
Lawyer
Country flag
That’ll have to wait. I’m still a working stiff.
Sponsored

 
 








Top