UP (Unplugged Performance) Rocker Panels and Sliders - Arrived & Installed

[JUSTICEQD]

I've been waiting for these @Unpluggedperformance rocker panels and sliders to become generally available vs back/pre order and that happened. I always felt these had the best OEM look and construction quality I've seen. I wanted to keep something true to the existing form of the cybertruck. At any rate, I ordered last week and they were delivered today. It took a little over an hour for the first as I was taking my time and checking everything out, but this could be done with 2 people really quickly. I only used a second set of hands to lift the new rockers into place. The sliders were already attached to the panel, so they were heavier.

Anyone in GA want to take a first hand look, feel free to drop a DM. Check them out for sure.

Sponsored

 

[CT_AZ_4x4]

I've been waiting for these to become generally available vs back/pre order and that happened. I always felt these had the best OEM look and construction quality I've seen. I wanted to keep something true to the existing form of the cybertruck. At any rate, I ordered last week and they were delivered today. It took a little over an hour for the first as I was taking my time and checking everything out, but this could be done with 2 people really quickly. I only used a second set of hands to lift the new rockers into place. The sliders were already attached to the panel, so they were heavier.

Anyone in GA want to take a first hand look, feel free to drop a DM.

Wow those are nice. I cannot tell exactly, but is there any loss of ground clearance?

Good lookin’ CT, man!

 

[JUSTICEQD]

Wow those are nice. I cannot tell exactly, but is there any loss of ground clearance?

Good lookin’ CT, man!

No change to ground clearance. A little wider though. They come out approx 5.5" from the side of the truck and just slightly wider than the OEM wheelbase. Maybe 1/4 to 1/2 inch.

 

[CT_AZ_4x4]

No change to ground clearance. A little wider though. They come out approx 5.5" from the side of the truck and just slightly wider than the OEM wheelbase. Maybe 1/4 to 1/2 inch.

 

[REM]

They look great! I'm hoping Tesla will also release some soon as well.

 

[ÆCIII]

They look great. Only question I have is do they allow access to jack points underneath without removing them (if so can you provide an image of the jack points underneath with these installed)?

- ÆCIII

 

[JUSTICEQD]

They look great. Only question I have is do they allow access to jack points underneath without removing them (if so can you provide an image of the jack points underneath with these installed)?

- ÆCIII

They follow the same shape/form as the OEM. They're still exposed / unobstructed

 

[Timthehelipilot]

I've been waiting for these @Unpluggedperformance rocker panels and sliders to become generally available vs back/pre order and that happened. I always felt these had the best OEM look and construction quality I've seen. I wanted to keep something true to the existing form of the cybertruck. At any rate, I ordered last week and they were delivered today. It took a little over an hour for the first as I was taking my time and checking everything out, but this could be done with 2 people really quickly. I only used a second set of hands to lift the new rockers into place. The sliders were already attached to the panel, so they were heavier.

Anyone in GA want to take a first hand look, feel free to drop a DM.

I have been waiting for these to be available to ship instead of backorder as well while also waiting to see what Tesa’s OEM ones will look like. These look sooooooo good. Do they look pretty flush with the fender flares?

 

[Pulaski]

I can attest, they are the most solid rock sliders I've ever installed on a truck. Easy bolt on and they look good.

 

[cadamo001]

Those look awesome. Should I ask the dumb question now and take it away from the trolls?
Do you notice an impact on range?
And I really don't care if they do but someone out there will DEFINITELY ask.

 

[Nidavellir]

Looks awesome. Are you going to do the UP INVINCIBLE® HD Rear Rock Sliders as well ?

 

[BENDERR]

I installed mine about 3 weeks ago. love them! I did have a fitment issue on the passenger side, both finder flairs would not mate back up where the sliders meet them. I ended up trimming the flairs to get them to mate. Drivers side did not have any issues. I do have an earlier VIN and that might be the reason.

oh and my range has increased at least 3 figures of merit. LOL

 

[bentoncalder]

Your truck looks rad dude. Question about the wrap. Did you get the foundation badge laser etched into the wrap?

 

[JUSTICEQD]

Looks awesome. Are you going to do the UP INVINCIBLE® HD Rear Rock Sliders as well ?

I'll at least do the front bumper at don't point. If I do the rear,v I'd do the sliders too.

 

[JUSTICEQD]

Your truck looks rad dude. Question about the wrap. Did you get the foundation badge laser etched into the wrap?

Thanks, no. I just had a regular black ppf decal over top. Looks etched. Same with beast on rear

Sponsored