Cybertruck turning stalk - DIY 3D Print

[Pops]

I 3D printed a toggle switch for the turning signal buttons on a Cybertruck. Because it lacks a turning stalk this helps to emulate one.

3D print STL file: https://www.cybertruckownersclub.com/forum/attachments/cybertruckturningstalkjoystick-stl.109077/

Sponsored

 

[hemiarch]

That’s WAY cool

 

[stumby]

Ingenious @Pops! Can you please attach the STL file so we can 3D print our own? Thank you

 

[Pops]

Attached here. I stuck it on with 3M double sided automotive tape.

 

[Pops]

If anyone has any preference changes for shape and size, let me know and I can make new versions of it.

 

[devdrone6]

Awesome

 

[RobertWarren]

I have no problem with the turn signals, but have considered doing something for the high beam button!! I despise the placement it is dangerous.

 

[Pops]

I have no problem with the turn signals, but have considered doing something for the high beam button!! I despise the placement it is dangerous.

Good idea, I will put some thought into that.

 

[TexasRaider]

$0.26 solution! Love it!

 

[CyberGus]

What you really need is a little joystick you can push left-right, which translates the motion into the down/up butons. But that would require levers, and/or a more sophisticated attachment.

 

[dalton108]

I 3D printed a toggle switch for the turning signal buttons on a Cybertruck. Because it lacks a turning stalk this helps to emulate one.

3D print STL file: https://www.cybertruckownersclub.com/forum/attachments/cybertruckturningstalkjoystick-stl.109077/

Pop’s you are a freaking genius and you need to patent sell this! Bravo!

—-

I did just have a thought, though … is there a way to wrap it around so that the mechanism works from the back where your grip is and where a turn signal would naturally be?

 

[jjban]

Great! If it could be made more Cybertruck style (triangular style), it would be perfect.

 

[CyberGus]

What you really need

I did just have a thought, though

If it could be made more Cybertruck style

everybody's a critic

sheez

 

[dpoll995]

I 3D printed a toggle switch for the turning signal buttons on a Cybertruck. Because it lacks a turning stalk this helps to emulate one.

3D print STL file: https://www.cybertruckownersclub.com/forum/attachments/cybertruckturningstalkjoystick-stl.109077/

what material did you use?

 

[Pops]

what material did you use?

PLA matte, its holding up pretty well, but I know its not ideal for hot cars. I might try other materials if this one falls apart.

Sponsored