Best location for RFID Gate Opener Sticker

[Woodrick]

I placed my RFID toll pass below the shading on the front window, passenger side, next to the cameras.
It is strategically located behind the bar of the visor (the magnetic one), so I really can't see it.

Sponsored

 

[The Tesla Guy]

I placed my RFID toll pass below the shading on the front window, passenger side, next to the cameras.
It is strategically located behind the bar of the visor (the magnetic one), so I really can't see it.

Perhaps an image would be helpful to understand where you’re putting it. But it sounds more like you have some sort of transponder rather than a clear sticker that generally gets put on the headlight.
Which around 3“ x 1“
This is just an example I found on the web

 

[Woodrick]

Perhaps an image would be helpful to understand where you’re putting it. But it sounds more like you have some sort of transponder rather than a clear sticker that generally gets put on the headlight.
Which around 3“ x 1“
This is just an example I found on the web

Same type

Random mounting picture.

Mine just hides behind visor bar. It took a while for my wife to find it.
Just below the black screening, immediate right of the camera bay.

 

[The Tesla Guy]

Same type

Random mounting picture.

Mine just hides behind visor bar. It took a while for my wife to find it.
Just below the black screening, immediate right of the camera bay.

Wait, what?
Now I’m more confused
That does not appear to be an image of the interior of a Cybertruck.

 

[Woodrick]

Wait, what?
Now I’m more confused
That does not appear to be an image of the interior of a Cybertruck.

Read my description "random mounting picture"

To give a better reference to size and type.

 

[The Tesla Guy]

Read my description "random mounting picture"

To give a better reference to size and type.

Only read the description below the image, missed the text above

 

[TECH49]

I used a cling to mount my gate sticker, toll pass sticker and registration sticker. Helps with testing for sure.

My gate sticker is at the top right, but at the bottom of the window tint so you can't see it from outside. It works, but you have to be closer than I'd like.

Next time I feel like messing with it I'm going to put it on the bottom of the right side mirror housing as that was a recommended place for my MS (that didn't actually work, so I don't have great expectations).

 

[Pumbaa]

Ok,
I did a few tests
Holding it directly under rear view mirror worked. Although it didn’t activate the sensor until I was closer than expected.
we tried it in a cellophane sleeve.
Not translucent opaque. No go.
so it should stuck onto the outside of the mirror hanger?

For me works just below windshield cameras/rear mirror.

Sponsored