NEW PRODUCT LAUNCH: CYBERTRUCKco Light-duty crossbars available now

[CYBERTRUCKco]

Great looking product. I can see some wanting murdered out branding, while others like the raised white letter look. Tomato vs toemahtoe.

Anyone with crossbars installed experience:

- reduced mileage?
- wind noise?

thanks!!!

You'll want to add a strip of the rubber in the front channel we sell if using on bar #1

Sponsored

 

[tmeyer3]

What size t slot extrusions are these? 20mm?

 

[CYBERTRUCKco]

What size t slot extrusions are these? 20mm?

Similar to Prinsu and other guys, 1020, 1x2", use 1/4"-20 hardware.

 

[tmeyer3]

Perfect! Super standard then

 

[Brandon708]

Only 100 lbs? What about wind load that may be introduced while driving. Not sure if I’d trust those.

 

[CYBERTRUCKco]

Only 100 lbs? What about wind load that may be introduced while driving. Not sure if I’d trust those.

100lbs is the downward force, tested up to 100mph without issue. These are the same bars that every ack company uses for 4Runners and most Bronco racks. The 2" width is the strongest side of the bar, zero chance of bending at any speed.

If you want heavy duty, we offer that as well over here: https://www.cybertruckownersclub.co...ossbars-shipping-now.18510/page-2#post-341259

hope that helps!

 

[CYBERTRUCKco]

FYI, these kits arrived on our dock today! We need to pack them up with the bars, so orders won't ship till Tuesday. We also added new accessories today!

Use coupon code 'MERICA for 20% off through July 4th, hiope that helps!

 

[Vesder21]

Has anyone been able to order these bars? I tried this weekend and posted a message back at @CYBERTRUCKco but I have not heard back and am not able to order.

The site shows that they are available and also out of stock so am not sure what is gong on.

 

[CYBERTRUCKco]

Has anyone been able to order these bars? I tried this weekend and posted a message back at @CYBERTRUCKco but I have not heard back and am not able to order.

The site shows that they are available and also out of stock so am not sure what is gong on.

Orders for light duty bars are shipping, if you have not shipped yet, will be going out tomorrow or Friday latest.

THANKS FOR YOUR BUSINESS!

 

[Vesder21]

Orders for light duty bars are shipping, if you have not shipped yet, will be going out tomorrow or Friday latest.

THANKS FOR YOUR BUSINESS!

I just visited the site again and tried to order, but it’s still says unavailable/not able to add to cart???

Can you please message me the details on how to order?

 

[tripzero]

Got mine installed. Was a bit of a challenge getting the mounting lock nuts on. It's a tight space to work in. I actually lost a locknut in the truck! Anyone know what size I need to replace them?

Update: M6 nuts.

 

[Vesder21]

Got mine installed. Was a bit of a challenge getting the mounting lock nuts on. It's a tight space to work in. I actually lost a locknut in the truck! Anyone know what size I need to replace them?

Update: M6 nuts.

I received my bars today and the install does not look like the video they published with the heavy duty version.

Like you I was finally able to tighten the nylon nut via a flexible adapter, but the hex screws that mount to the T nuts are stripping my #4 and Allen wrench because of the loctite that was applied to the hex screws.

did you experience the same thing? Were you able to tighten all eight heck screws? If so, what tool did you use?

 

[tripzero]

I received my bars today and the install does not look like the video they published with the heavy duty version.

Like you I was finally able to tighten the nylon nut via a flexible adapter, but the hex screws that mount to the T nuts are stripping my #4 and Allen wrench because of the loctite that was applied to the hex screws.

did you experience the same thing? Were you able to tighten all eight heck screws? If so, what tool did you use?

H4/4mm hex tool worked for me.

 

[Vesder21]

Ok, I emailed them to request new bolts because all of mine stripped. Was there some sort of blue Loctite substance on your stainless screws?

Also can you please link me to that tool?

I ordered a few of these bits because mine might have been too soft and stripped all the nuts.

https://a.co/d/5O5MnD0

H4/4mm hex tool worked for me.

 

[Roger@CYBERTRUCKco]

Ok, I emailed them to request new bolts because all of mine stripped. Was there some sort of blue Loctite substance on your stainless screws?

Also can you please link me to that tool?

I ordered a few of these bits because mine might have been too soft and stripped all the nuts.

https://a.co/d/5O5MnD0

The blue loctite is so they don’t back out… you stripped all the tnuts? This doesn’t make sense.

Sponsored