Sponsored

Diveflyfish

Well-known member
First Name
James
Joined
Feb 21, 2020
Threads
16
Messages
202
Reaction score
182
Location
Wisconsin
Vehicles
2024 CyberBeast 2011 BMW 335d
Occupation
Dentist
Country flag
I would think they are not suggesting it because any flex with something heavy could possibly break the top window. I would just say do it at your own risk.
[/QUOTE. The flex and top glass does not seem to be the issue due to the photo shows variants that would not involve that issue as being not a recommended method as well. This is perplexing.
Tesla Cybertruck OEM Crossbars: Received and Installed IMG_3694
Sponsored

 

dwillingham1

Member
First Name
David
Joined
Aug 3, 2024
Threads
10
Messages
22
Reaction score
50
Location
Atlanta
Vehicles
Cybertruck
Country flag
I installed mine today. Did not take two people - just me climbing on the roof. There seems to be ever so slight a bit of play in them and I can't tell if this is normal of they need to be secured better. But I resecured several times and they don't go on any more flush.

Tesla Cybertruck OEM Crossbars: Received and Installed IMG_1451
 

wtibbit

Well-known member
First Name
Wayne
Joined
Aug 27, 2020
Threads
12
Messages
819
Reaction score
1,617
Location
DFW
Vehicles
Cybertruck AWD FS, Mercedes sedan, Corvette coupe, 1968 Cougar XR-7
Occupation
Retired Engineering Program Director
Country flag
Unless I can find an engineering basis for the restrictions on the last five configuration on this page, I will use the fourth and fifth configurations to haul lightweight, long items, such as pvc pipe, trim lumber. I also think the fourth configuration would work for soft items that weigh less than 150 pounds or so, such as a mattress. Actually, those are the type of things I haul that are most likely to need the crossbars.
 

Guylouis

Well-known member
First Name
Guy
Joined
Dec 18, 2023
Threads
14
Messages
678
Reaction score
1,064
Location
San Diego
Vehicles
F.S. CyberBeast, XP, YP, 3P
Country flag
Drove up the mountains to lake arrowhead this weekend

Starlink was able to handle everything I threw At it from freeway speed exceeding 90 mph to some heavy winds and rain. I averaged 200 Mbps in motion in 40° temperatures.

Overall I am so glad I waited for the Tesla crossbars

Tesla Cybertruck OEM Crossbars: Received and Installed IMG_2243
Tesla Cybertruck OEM Crossbars: Received and Installed IMG_2236
Tesla Cybertruck OEM Crossbars: Received and Installed IMG_2228
 

LivinLrge

Well-known member
First Name
Matt
Joined
Jul 19, 2024
Threads
3
Messages
82
Reaction score
76
Location
Palm Beach
Vehicles
Cyberbeast, M4 Comp, Model 3 Plaid
Occupation
Entrepreneur
Country flag
I've had mine installed for about 500 miles now and I have not seen any noticeable difference in efficiency. Highway, city and combined driving.
 


OP
OP
dalton108

dalton108

Well-known member
First Name
Dalton
Joined
Oct 17, 2020
Threads
130
Messages
3,949
Reaction score
7,873
Location
USA
Vehicles
‘24 FS/CB; ‘24 MX; ‘23 MS PLAID (Prior: ‘20-MY; ‘21-M3P) (Also: ‘14-FJ; ‘21-C8)
Occupation
Lawyer
Country flag
I've had mine installed for about 500 miles now and I have not seen any noticeable difference in efficiency. Highway, city and combined driving.
Same here.

I think the thing about the Cybertruck is that while, IIRC, it has the lowest coefficient of drag of any full-size truck, it’s still relatively brick-like in the world of evs. So, unlike the Lucid, it’s not affected nearly as much by minor perturbations to the aero design. Kyle & Co. learned that in their cross-country mega comparison recently.

I’ve seen no appreciable impact on range because of either the crossbars or the factory lightbar or the combination of both.

But, I’m not a hyper-miler and I’m not going to be driving any style other than fast and hard. So, very literally, YMMV.
 
Last edited:

LivinLrge

Well-known member
First Name
Matt
Joined
Jul 19, 2024
Threads
3
Messages
82
Reaction score
76
Location
Palm Beach
Vehicles
Cyberbeast, M4 Comp, Model 3 Plaid
Occupation
Entrepreneur
Country flag
Same here.

I think this about the Cybertruck is it’s that while IIRC it has the lowest coefficient of drag of any full-size truck, it’s still relatively brick-like in the world of evs. So, unlike the Lucid it’s not affected nearly as much by minor perturbations to the aero design. Kyle & Co. learned that in their cross-country mega comparison recently.

I’ve seen no appreciable impact on range because of either the crossbars or the factory lightbar or the combination of both.

But, I’m not a hyper-miler and I’m not going to be driving any style other than fast and hard. So, very literally, YMMV.

I am curious once I throw up a few pairs of skis if that changes anything but then again the conditions will be dramaticly different then down here in Florida
 

ActiveArch

Well-known member
First Name
Nubar
Joined
Dec 5, 2024
Threads
9
Messages
126
Reaction score
340
Location
california
Vehicles
cybertruck
Country flag
A few things:

1. I bought two sets, but I’m now convinced I’ll only ever use them in this configuration above the cabin. So, I’ll only need two.

2. They are a lot heavier than you would suspect build quality is premium.

3. They have to be torqued to 7.8 Nm but, conveniently, Tesla has provided you with a torque wrench (pictured) set to just that amount.

4. Installation is simple; however, if you have a FS CB with the light bar harness waiting to be installed you’re going to have to move that loop out of the way and it’s a bit challenging. Or at least it was for me. Follow the instructions (pictured) and pull the harness toward you don’t try to push it back. If you pull it forward there’s a little space where you can tuck it in under the appliqué. I still had to cut the loop and straighten it out to make it work but that’s only because I put the mounting plate on before I tucked it in.

5. If you bought two sets like I did, each set has enough striker points for all of your mounting positions so you will end up with extra.

6. They are not straight. They have a nice little arc to them which you can see in my initial photos. Not sure if it’s for arrow or loadbearing but either way - looks cool!



IMG_1954.jpeg
Very cool, they do look great. I’ve been looking at these vs aftermarket specifically for mounting an upright bike into it but considering the bike would be either on the very left or right, I worry that it’d not be vertical, putting some extra load onto only one side of the bike frame and especially the from fork. I’d be using a Thule upride. It’d probably be fine but I wonder if it’d look weird leaning to one side. What sort of things are you planning on loading up there?
 

ActiveArch

Well-known member
First Name
Nubar
Joined
Dec 5, 2024
Threads
9
Messages
126
Reaction score
340
Location
california
Vehicles
cybertruck
Country flag
So my question with these is why didn’t they add some loop points for tie downs or rope or what ever? How are you spose to tie things down properly if you ever use them for other then looks ?
The way most of these load bars work is there’s a T-bar running down the middle that lets you slide accessories onto it, and then tons of other accessories have sort of like a claw that simply grabs onto it tightly, many roof cargo boxes for example. Other products are designed to work with various load bars.
 

Vegetaban

Well-known member
First Name
Jeremy
Joined
Nov 30, 2021
Threads
14
Messages
205
Reaction score
257
Location
Pennsylvania
Vehicles
CT AWD
Occupation
Pharmaceutical Quality Assurance
Country flag
I’ve tied a lot of things onto crossbars, ever since I got my first vehicle with them, 54 years ago.

I tie things down with rope, using knots I learned when I was a Cub Scout.

If you’re too old to be a Cub Scout just get yourself some rope, study this, and you’ll be ready to tie things down properly, too! :LOL:https://www.cubsource.org/Step_By_Step_Basic_Knots.pdf
Thanks, been a while since I was a Boy Scout and forgot some of these knots.
 


area51

Well-known member
Joined
Apr 1, 2025
Threads
3
Messages
110
Reaction score
118
Location
Los Angeles
Vehicles
Cyberbeast
Occupation
Neurosurgeon
Country flag
Drove up the mountains to lake arrowhead this weekend

Starlink was able to handle everything I threw At it from freeway speed exceeding 90 mph to some heavy winds and rain. I averaged 200 Mbps in motion in 40° temperatures.

Overall I am so glad I waited for the Tesla crossbars

IMG_2243.jpeg
IMG_2236.jpeg
IMG_2228.jpeg
Is that a Starlink or Starlink mini? Debating between the two.

I’m also trying to decide whether to go with the Tesla crossbars vs Mars Adventure gear ones.
 

Stuck4ger

Well-known member
Joined
Dec 6, 2019
Threads
54
Messages
1,372
Reaction score
2,545
Location
Cape Canaveral, FL
Vehicles
Cyberbeast
Occupation
Aerospace
Country flag
Is that a Starlink or Starlink mini? Debating between the two.

I’m also trying to decide whether to go with the Tesla crossbars vs Mars Adventure gear ones.
Why would you not go with the mini? It certainly works well enough, is easier to power, has a built-in-the-dish router, and you can throw it in your backpack with a small battery, or move it around the campsite.
 

area51

Well-known member
Joined
Apr 1, 2025
Threads
3
Messages
110
Reaction score
118
Location
Los Angeles
Vehicles
Cyberbeast
Occupation
Neurosurgeon
Country flag
Why would you not go with the mini? It certainly works well enough, is easier to power, has a built-in-the-dish router, and you can throw it in your backpack with a small battery, or move it around the campsite.
Speed is the issue. I heard zoom calls are problematic on the mini.
 

area51

Well-known member
Joined
Apr 1, 2025
Threads
3
Messages
110
Reaction score
118
Location
Los Angeles
Vehicles
Cyberbeast
Occupation
Neurosurgeon
Country flag
 








Top