3D Print - Frunk loose bag containment fence

[TickTock]

I have the frunk L-track and cargo net sold by Tesla (https://shop.tesla.com/product/cybertruck-front-trunk-l-track-_-cargo-net) but always wished the net could be oriented vertically so I could more easily contain grocery bags. Without such a fence, shifty bags tend to slide and collapse where they would get pinched when closing the frunk. This print locks into the L-track, but holds the mesh vertically so now I can just toss the bags in without worrying about cans and stuff dribbling out.

I printed it in PCTG and after several weeks in Arizona heat (many days over 45C) it has shown no signs of distortion despite the tension from the mesh. Pretty sure PETG would not have fared as well. My apologies, but this also requires a large print bed. If there is enough interest, I will create a version that can be printed on a standard print bed in sections and glued together.

The print file can be downloaded for free here:

https://www.printables.com/model/1782885-cybertruck-frunk-containment-fence

Sponsored

 

[AverageJoe]

I have a project I would really appreciate some help on if your available. I would like to 3d print or have 3d printed (2) caps for v2 superchargers and (2) bezels the red center. I'm barely pla filament able on a anycubic kobra 2 or 3 max

 

[That Beast Mode]

I have the frunk L-track and cargo net sold by Tesla (https://shop.tesla.com/product/cybertruck-front-trunk-l-track-_-cargo-net) but always wished the net could be oriented vertically so I could more easily contain grocery bags. Without such a fence, shifty bags tend to slide and collapse where they would get pinched when closing the frunk. This print locks into the L-track, but holds the mesh vertically so now I can just toss the bags in without worrying about cans and stuff dribbling out.

I printed it in PCTG and after several weeks in Arizona heat (many days over 45C) it has shown no signs of distortion despite the tension from the mesh. Pretty sure PETG would not have fared as well. My apologies, but this also requires a large print bed. If there is enough interest, I will create a version that can be printed on a standard print bed in sections and glued together.

The print file can be downloaded for free here:

https://www.printables.com/model/1782885-cybertruck-frunk-containment-fence


View attachment 125902 fre

@TickTock Keep em coming Tick, you always make some cool and useful stuff. I rarely see new prints for the CT anymore... I wish I was better at the designing part of 3d printing. Which printer do you use that has a larger bed?

 

[hemiarch]

I have the frunk L-track and cargo net sold by Tesla (https://shop.tesla.com/product/cybertruck-front-trunk-l-track-_-cargo-net) but always wished the net could be oriented vertically so I could more easily contain grocery bags. Without such a fence, shifty bags tend to slide and collapse where they would get pinched when closing the frunk. This print locks into the L-track, but holds the mesh vertically so now I can just toss the bags in without worrying about cans and stuff dribbling out.

I printed it in PCTG and after several weeks in Arizona heat (many days over 45C) it has shown no signs of distortion despite the tension from the mesh. Pretty sure PETG would not have fared as well. My apologies, but this also requires a large print bed. If there is enough interest, I will create a version that can be printed on a standard print bed in sections and glued together.

The print file can be downloaded for free here:

https://www.printables.com/model/1782885-cybertruck-frunk-containment-fence


View attachment 125902 fre

This is awesome

 

[Schroederhc]

I have the frunk L-track and cargo net sold by Tesla (https://shop.tesla.com/product/cybertruck-front-trunk-l-track-_-cargo-net) but always wished the net could be oriented vertically so I could more easily contain grocery bags. Without such a fence, shifty bags tend to slide and collapse where they would get pinched when closing the frunk. This print locks into the L-track, but holds the mesh vertically so now I can just toss the bags in without worrying about cans and stuff dribbling out.

I printed it in PCTG and after several weeks in Arizona heat (many days over 45C) it has shown no signs of distortion despite the tension from the mesh. Pretty sure PETG would not have fared as well. My apologies, but this also requires a large print bed. If there is enough interest, I will create a version that can be printed on a standard print bed in sections and glued together.

The print file can be downloaded for free here:

https://www.printables.com/model/1782885-cybertruck-frunk-containment-fence


View attachment 125902 fre

That looks awesome!

 

[machmax]

Tnx TT!

 

[Ranger George]

I have the frunk L-track and cargo net sold by Tesla (https://shop.tesla.com/product/cybertruck-front-trunk-l-track-_-cargo-net) but always wished the net could be oriented vertically so I could more easily contain grocery bags. Without such a fence, shifty bags tend to slide and collapse where they would get pinched when closing the frunk. This print locks into the L-track, but holds the mesh vertically so now I can just toss the bags in without worrying about cans and stuff dribbling out.

I printed it in PCTG and after several weeks in Arizona heat (many days over 45C) it has shown no signs of distortion despite the tension from the mesh. Pretty sure PETG would not have fared as well. My apologies, but this also requires a large print bed. If there is enough interest, I will create a version that can be printed on a standard print bed in sections and glued together.

The print file can be downloaded for free here:

https://www.printables.com/model/1782885-cybertruck-frunk-containment-fence

View attachment 125999 View attachment 125999

 

[Ranger George]

This Dakine Gear Organizer fits perfect in the frunk and has three compartments. It also can be folded flat and easily

stored when not being used.

 

[GregimusPrime]

I have the frunk L-track and cargo net sold by Tesla (https://shop.tesla.com/product/cybertruck-front-trunk-l-track-_-cargo-net) but always wished the net could be oriented vertically so I could more easily contain grocery bags. Without such a fence, shifty bags tend to slide and collapse where they would get pinched when closing the frunk. This print locks into the L-track, but holds the mesh vertically so now I can just toss the bags in without worrying about cans and stuff dribbling out.

I printed it in PCTG and after several weeks in Arizona heat (many days over 45C) it has shown no signs of distortion despite the tension from the mesh. Pretty sure PETG would not have fared as well. My apologies, but this also requires a large print bed. If there is enough interest, I will create a version that can be printed on a standard print bed in sections and glued together.

The print file can be downloaded for free here:

https://www.printables.com/model/1782885-cybertruck-frunk-containment-fence

This is pretty bada$$, well done

Sponsored