3D print mount for Uniden radar detector

[gaubong053]

This is great. Does it block the in car camera at all?

It blocks a little bits and you can still see driver and passenger faces. I may redesign it when FSD available and if it prevents FSD functionality.

Sponsored

 

[Crissa]

It blocks a little bits and you can still see driver and passenger faces. I may redesign it when FSD available and if it prevents FSD functionality.

Does the mirror block that much?

-Crissa

 

[Jbrazda]

It blocks a little bits and you can still see driver and passenger faces. I may redesign it when FSD available and if it prevents FSD functionality.

Looks like it block most of it not a bit of it.

 

[CyberGus]

Does the mirror block that much?

-Crissa

The mirror is visible, but only just.

 

[Crissa]

The mirror is visible, but only just.

Thanks, Gus.

Weird that it's visible at all.

-Crissa

 

[CyberGus]

Thanks, Gus.

Weird that it's visible at all.

-Crissa

I guess they assumed everyone was removing them hahahaha

 

[seanhelmes]

Would love if you can share a 3d print file of something like this for same mount point where it doesn't block the interior camera view a lot. Perhaps extending the length slightly can make it out of view to the interior camera?

 

[Alan]

If it blocks the interior camera fsd may Not work when it comes out.

 

[seanhelmes]

Yes, would love a version of this I can 3D print where it won't block any of the interior camera view. FSD will not work with view obstructed like this when it comes available in June for Cybertruck.

 

[gaubong053]

Working on new version that doesn’t block the view.
Here is the view. You can see the new Cybervessle

 

[bkandy3]

Awesome! Please post the link once you finalize. Thank you! I can’t tell you how much I appreciate it. This is amazingly slick.

Score on jumping on that vessel so quick!

 

[getsometom]

Are you by chance going to make ones that fit other detectors?

 

[M0unt41nm4n]

Working on new version that doesn’t block the view.
Here is the view. You can see the new Cybervessle

Out...stand...ding!!!

I was driving up the highway and a cop saw me and did a full U-Turn.... I guess they wanted to see my CT. I had no warning and the Uniden would have let me know his presence 2 miles up the road. I missed my Uniden R7 (it's in my Ford) right then. I have no 12v outlet and I need a mount. This is perfect.

Please let us know when you have the final version and I will run down and get it printed off... I'm chomping bit to get my detector mounted!

 

[thrillbourne]

This is awesome, can't wait for the updated file!

 

[AlphaG]

Thanks for the link! I hardwired a Valentine One this weekend with the help of the service manual link. Used a generic RJ11 wire tap kit for V1 from Amazon to tap into the camera power. Will have to work on a printed mount to put it in the rear view mirror spot, but for now at least I got some protection with the radar mounted on the windshield next to the overhead panel.

Here is the quick manual
1. Use the instruction from: https://service.tesla.com/docs/Cybe...UID-517B6C63-EA55-49A6-BB38-4B2D43648DB4.html to access cabin camera
2. From above step, you will see a 2-pin white connector (pic2)
3. Buy a wire tap kit: https://www.amazon.com/dp/B097MGX318?psc=1&ref=ppx_yo2ov_dt_b_product_details
4. Print the mount then use the old T20 screw from mirror assembly.

Sponsored