Core wheels vs FS wheels - identical spec fitment?

[hybrid_eg]

Hello gents,

can anyone confirm if Core wheels are identical in size and offset as FS wheels? We know both are 20” as both AT and AS tires are same size but I’m curious if they are also exact same width and offset? 20x9+58.5?

thank you all!!

Sponsored

 

[Black306]

I’m curious about the hub opening as well. Plan to remove the factory wheel covers and go with hub caps. No site says either yay or nay that currently available hub caps fit on Core wheels.

 

[hybrid_eg]

You mean large wheels covers on core wheels with AS tires? Yea I’m curious about that as well.. but more importantly care about width and offset between the two types of wheels.. if I find more, I’ll post here

 

[Lasttoy]

If u have any covers great. I ordered AT wheels, got AS MS . I asked SC when do I get my centers??? In the mail, really? This year??

 

[Black306]

Ordered these but no one can tell me if they'll fit on Core wheels. Guess I'll find out the hard way. ?‍

https://www.amazon.com/dp/B0DFY6SY2S/ref=pe_386300_440135490_TE_simp_item_image?th=1

 

[bleudyno]

I've purchased about 5 different sets from Amazon, including the one you posted, and they all DO NOT FIT. I've seen some posts from members saying that they fit but the sizing between the Cyberwheels vs the core wheels is slightly different so the ones made for the cyber wheels COULD fit on the core wheels but they are not secure. Of the sets I bought, the covers seem to fit on 2 out of my 4 wheels but pop off easily which means they could just flying off while driving. Still don't see any centercaps made for the core wheels yet.....

 

[Black306]

Appreciate the feedback!


Is it the diameter and/or depth of the center piece that doesn't fit?

Any issues with lining up on the outer edge?

 

[mongo]

Hello gents,

can anyone confirm if Core wheels are identical in size and offset as FS wheels? We know both are 20” as both AT and AS tires are same size but I’m curious if they are also exact same width and offset? 20x9+58.5?

thank you all!!

Yes, they are identical
https://www.tesla.com/ownersmanual/cybertruck/en_us/GUID-9284C9F2-A2F2-4604-83BF-6599F47766B7.html

 

[bleudyno]

Appreciate the feedback!


Is it the diameter and/or depth of the center piece that doesn't fit?

Any issues with lining up on the outer edge?

Its the depth of the wheel covers that make it not work. The core wheels are slightly deeper which is the reason why the cyberwheel caps don't fit on. They might barely clip on if you push it in hard enough but they will pop off quite easily. In addition, I also tried the caps you pictured and there are little "fins" behind the cap that prevent that particular cover from fitting on even more.

 

[steveanderson3]

Ordered these but no one can tell me if they'll fit on Core wheels. Guess I'll find out the hard way. ?‍

https://www.amazon.com/dp/B0DFY6SY2S/ref=pe_386300_440135490_TE_simp_item_image?th=1

Following!

 

[Black306]

Ordered these but no one can tell me if they'll fit on Core wheels. Guess I'll find out the hard way. ?‍

https://www.amazon.com/dp/B0DFY6SY2S/ref=pe_386300_440135490_TE_simp_item_image?th=1

Its the depth of the wheel covers that make it not work. The core wheels are slightly deeper which is the reason why the cyberwheel caps don't fit on. They might barely clip on if you push it in hard enough but they will pop off quite easily. In addition, I also tried the caps you pictured and there are little "fins" behind the cap that prevent that particular cover from fitting on even more.

Well, I know what you're talking about now. I tried shaving down the "fins," but it took a bit more than that. I ended up cutting it along just inside the 'ledge.' (marked in red)

Cool thing is I think it looks good.

Bad thing is that I trimmed a bit too much inboard and the cap can rotate slightly in the wheel making it not align with the rim. Boo.

 

[Black306]

Well, I know what you're talking about now. I tried shaving down the "fins," but it took a bit more than that. I ended up cutting it along just inside the 'ledge.' (marked in red)

Cool thing is I think it looks good.

Bad thing is that I trimmed a bit too much inboard and the cap can rotate slightly in the wheel making it not align with the rim. Boo.

Ended up ordering these in matte black: https://www.amazon.com/dp/B0D2Q4L855?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

And they fit fine.

For anyone that wants the ones below, let me know. I'll give you a screaming deal since I 'modified' one.

Sponsored