Memory seat recall no longer working

[ls9999]

Anyone experiencing issues with memory seat recall since the latest update? Since installing 2025.32.6, the bottom slider on the driver’s seat does not recall correctly. If switching for my wife to myself, it moves everything into the proper position except the slide forward/back. It makes and adjustment forward or back but not into the correct location. And if I manually adjust the seat and choose “restore”, it will correct all changes except sliding forward and back.
I have run the driver’s seat calibration multiple times as well with nothing working.

Sponsored

 

[YukonJack]

Hi,

I've had this issue after a seat replacement when the recline motor stopped.

Try typing calibrate in the search area and you fill find an option to recalibrate your seat and mirrors. Should fix the issue.

 

[ls9999]

Hi,

I've had this issue after a seat replacement when the recline motor stopped.

Try typing calibrate in the search area and you fill find an option to recalibrate your seat and mirrors. Should fix the issue.

Unfortunately I've already done the recalibration multiple times to no avail.

 

[getsometom]

@ls9999 were you able to fix the problem? I'm having the same issue.

 

[ls9999]

@ls9999 were you able to fix the problem? I'm having the same issue.

I was able to get things working right again by disconnecting and reconnecting the slider location sensor. It is mounted on the slider rail closer to the passenger side. To access I found it easiest to move the seat all the way forward then go through the passenger door and look under the drivers seat basically below the center console. You will see a wire connector and sensor mounted to the slider rail. I wiggled it free from the rail then disconnected and reconnected the wire connection. Then reattached to the rail. I then ran the recalibration.

Here’s the link to the info in the service manual:
https://service.tesla.com/docs/Cybe...UID-EFF7D82B-FB38-4C1C-87B6-683006C05CE3.html

 

[getsometom]

Thank you. I will try it out.

Sponsored