MOLLE HOOKUPS AND CONNECTIONS HELP

[jsalamida]

New to the family - my preowned foundation series came with the Molle add-ons in the bed and I’m having a hard time finding consistent information on what works with this specific hardware. There’s universal Molle products but some say the Tesla version is a little different. Anyone have some ideas or experience when using them to hang tools and gear? THANK YOU!!

Sponsored

 

[Fabville]

Are you mostly interested in finding Molle nuts that will work? Molle panel openings can vary from manufacturer to manufacturer with the overall hole size and radius.

For the OEM Molle sail panels, the Molle nuts by Runnin4Tacos fit great and match the radius.

https://runnin4tacos.com/products/r...el-mount-solution?_pos=1&_sid=5d62903bf&_ss=r

I’ve also used Molle nuts from BuiltRight, the radius is a different size, but they still work.

 

[TWRAPS]

Congrats on the truck. You're right that the Tesla bed MOLLE isn't quite standard - the slot spacing is a little different from the universal 1in webbing, so a lot of off-the-shelf hooks don't seat properly and end up rattling loose. We make a set of CyberHooks cut specifically for the CT's MOLLE panels (and the Vault cargo divider if you're running one) - they clip in solid and hold tools, bags, cables, that kind of thing. $14.95-19.95 a set if you want a plug-and-play option: https://twraps.com/products/cyberhooks-for-cybertrucks-molle-panels-vault-cargo-divider

 

[jsalamida]

Are you mostly interested in finding Molle nuts that will work? Molle panel openings can vary from manufacturer to manufacturer with the overall hole size and radius.

For the OEM Molle sail panels, the Molle nuts by Runnin4Tacos fit great and match the radius.

https://runnin4tacos.com/products/r...el-mount-solution?_pos=1&_sid=5d62903bf&_ss=r

I’ve also used Molle nuts from BuiltRight, the radius is a different size, but they still work.

This helps SO much! I appreciate the help greatly. Yes to answer your question - I didn’t even know where to start. This is super help

 

[jsalamida]

Congrats on the truck. You're right that the Tesla bed MOLLE isn't quite standard - the slot spacing is a little different from the universal 1in webbing, so a lot of off-the-shelf hooks don't seat properly and end up rattling loose. We make a set of CyberHooks cut specifically for the CT's MOLLE panels (and the Vault cargo divider if you're running one) - they clip in solid and hold tools, bags, cables, that kind of thing. $14.95-19.95 a set if you want a plug-and-play option: https://twraps.com/products/cyberhooks-for-cybertrucks-molle-panels-vault-cargo-divider

Wow! Amazing! Going to order a pack. THANK YOU!

Sponsored