New: Behind the screen tray with removable dividers

[TWRAPS]

Hey folks

I've recently completed designing and testing a new version of our signature behind the screen tray. This is a longer version that features 3 dividers which you can adjust/remove. The divider steps are at 1/3, 1/2 and 2/3 positions giving you plenty of options to customize based on your needs.
I've also redesigned this (and the smaller version of it) to NOT lean against the display, based on feedback. It now "wraps around" the dash and leaves 0.5" gap to the display to allow for when I release our display swivel kit which I am working on.

For the record:
* This is designed & made in the USA, designed by us and made by us in our own factory in California
* Tested using our own Cybertruck + several other owners to confirm uniform fitment
* This is 3D printed using carbon fiber infused ABS which is very durable and thermally stable but also hides layer lines, removing the usual feel of 3D prints. It looks really sleek in person.

You can buy it for $34.95 (free shipping) from our store at:
https://twraps.com/products/behind-screen-storage-tray-for-tesla-cybertruck-dashboard-organizer

Any questions or recommendations for next iteration, please do share!

Thank you for supporting us! That means supporting Made in the ??USA, supporting original designs & innovation, supporting small family business and the development of local economy!

Sponsored

 

[ChiTownCT]

Ordered

 

[TWRAPS]

Ordered

Thank you! Will ship on Monday ??

 

[TexasRaider]

Is there a way to keep the sunglasses to become 1,000 degrees in the Texas Summer Sun in this location?

 

[TWRAPS]

Is there a way to keep the sunglasses to become 1,000 degrees in the Texas Summer Sun in this location?

That's where I keep mine...I am in California but we've had many weeks of over 100F here too, and I haven't had any issues. I tend to pre-cool my car before a ride (unless I forget) and also keep the Overheat protection On.

 

[greggertruck]

Hey folks

I've recently completed designing and testing a new version of our signature behind the screen tray. This is a longer version that features 3 dividers which you can adjust/remove. The divider steps are at 1/3, 1/2 and 2/3 positions giving you plenty of options to customize based on your needs.
I've also redesigned this (and the smaller version of it) to NOT lean against the display, based on feedback. It now "wraps around" the dash and leaves 0.5" gap to the display to allow for when I release our display swivel kit which I am working on.

For the record:
* This is designed & made in the USA, designed by us and made by us in our own factory in California
* Tested using our own Cybertruck + several other owners to confirm uniform fitment
* This is 3D printed using carbon fiber infused ABS which is very durable and thermally stable but also hides layer lines, removing the usual feel of 3D prints. It looks really sleep in person.

You can buy it for $34.95 (free shipping) from our store at:
https://twraps.com/products/behind-screen-storage-tray-for-tesla-cybertruck-dashboard-organizer

Any questions or recommendations for next iteration, please do share!

Thank you for supporting us! That means supporting Made in the ??USA, supporting original designs & innovation, supporting small family business and the development of local economy!

I LOVE THEM! Viva Twraps! Love that with this one, it doesn’t block use of a phone holder or a magbak on the screen!

 

[Outdoors]

Is there a way to keep the sunglasses to become 1,000 degrees in the Texas Summer Sun in this location?

A great way to mess up all the nice prescription glasses coatings. Yet we have some bias around. Look it up.

 

[TexasRaider]

That's where I keep mine...I am in California but we've had many weeks of over 100F here too, and I haven't had any issues. I tend to pre-cool my car before a ride (unless I forget) and also keep the Overheat protection On.

It must be a different heat. Ha
I’ve left mine in front of the steering wheel and have to cool them down before use out of the sun. But it was worth an ask. Ha

 

[MyFirstElectricTesla]

Hey folks

I've recently completed designing and testing a new version of our signature behind the screen tray. This is a longer version that features 3 dividers which you can adjust/remove. The divider steps are at 1/3, 1/2 and 2/3 positions giving you plenty of options to customize based on your needs.
I've also redesigned this (and the smaller version of it) to NOT lean against the display, based on feedback. It now "wraps around" the dash and leaves 0.5" gap to the display to allow for when I release our display swivel kit which I am working on.

For the record:
* This is designed & made in the USA, designed by us and made by us in our own factory in California
* Tested using our own Cybertruck + several other owners to confirm uniform fitment
* This is 3D printed using carbon fiber infused ABS which is very durable and thermally stable but also hides layer lines, removing the usual feel of 3D prints. It looks really sleep in person.

You can buy it for $34.95 (free shipping) from our store at:
https://twraps.com/products/behind-screen-storage-tray-for-tesla-cybertruck-dashboard-organizer

Any questions or recommendations for next iteration, please do share!

Thank you for supporting us! That means supporting Made in the ??USA, supporting original designs & innovation, supporting small family business and the development of local economy!

I wish you have this version earlier. I bought your previous ones, two of them to fit the back of the screen, and can't adjust/remove: anyone wants to buy my previous version so I can get this one instead? LOL.

 

[HaulingAss]

It looks really sleep in person.

???

 

[FuryEV]

I will be posting a review of this on Monday. I alerady have it. Really like the new design and Fit !

 

[jimnycricket65]

Hey folks

I've recently completed designing and testing a new version of our signature behind the screen tray. This is a longer version that features 3 dividers which you can adjust/remove. The divider steps are at 1/3, 1/2 and 2/3 positions giving you plenty of options to customize based on your needs.
I've also redesigned this (and the smaller version of it) to NOT lean against the display, based on feedback. It now "wraps around" the dash and leaves 0.5" gap to the display to allow for when I release our display swivel kit which I am working on.

For the record:
* This is designed & made in the USA, designed by us and made by us in our own factory in California
* Tested using our own Cybertruck + several other owners to confirm uniform fitment
* This is 3D printed using carbon fiber infused ABS which is very durable and thermally stable but also hides layer lines, removing the usual feel of 3D prints. It looks really sleep in person.

You can buy it for $34.95 (free shipping) from our store at:
https://twraps.com/products/behind-screen-storage-tray-for-tesla-cybertruck-dashboard-organizer

Any questions or recommendations for next iteration, please do share!

Thank you for supporting us! That means supporting Made in the ??USA, supporting original designs & innovation, supporting small family business and the development of local economy!

I am not sure if mine is exactly the same but it is nicely hidden behind the display and I use it exclusively for my sunglasses.

 

[jimnycricket65]

This is exactly the brand. His tray for the door handle opening is very useful. I also bought the tray for the empty space/area near the accelerator.

 

[TWRAPS]

???

Ops! Typo! I meant to say it looks really sleek in person!

Sponsored