Rocker damage replacement process

[heems]

2 tabs and 4 screws to contend with - after removing the 6 bolts for the side rocker panel and unclipping a bit of the render fender flare for a bolt underneath it. ?

Sponsored

 

[65SoYoLO]

2 tabs and 4 screws to contend with - after removing the 6 bolts for the side rocker panel and unclipping a bit of the render fender flare for a bolt underneath it. ?

ah ha! I have been avoiding fixing mine since it looks like a pita.

 

[heems]

ah ha! I have been avoiding fixing mine since it looks like a pita.

12 min if you know your way around ?

 

[not_elon_]

If the fairings are for aerodynamic purposes I wonder how un aerodynamic the mud-flaps are?

 

[no%X#XMVk65v#cq]

I've lost three of those damn "fairings". And they are a pain to remove and replace. Hope someone can come up with a 3D printed part that is flat and out of the way. For now I just go without them.

We really need a solution that neatly caps off the rocker in place of this.

 

[sefar]

We really need a solution that neatly caps off the rocker in place of this.

Problem is only one side Comes off, right? Other one is part of the rocket fairing.

 

[no%X#XMVk65v#cq]

Problem is only one side Comes off, right? Other one is part of the rocket fairing.

They are a separate part from the rocker, but are screwed in from behind, so not easily removed like the fronts.

 

[sefar]

They are a separate part from the rocker, but are screwed in from behind, so not easily removed like the fronts.

Right, but isn't the drivers side all one piece, vs a cap on the passenger side?

 

[mongo]

Right, but isn't the drivers side all one piece, vs a cap on the passenger side?

Driver and passenger sides are built the same, just mirror images.

 

[no%X#XMVk65v#cq]

Right, but isn't the drivers side all one piece, vs a cap on the passenger side?

Not to my knowledge, but I've only had the passenger side apart.

 

[Killlbox]

Mine got destroyed also.
Are there any after market options that aren’t cheap plastic?

 

[mongo]

Mine got destroyed also.
Are there any after market options that aren’t cheap plastic?

It might be better to break those pieces than the rocker they attach to.

 

[Outdoors]

Mine got destroyed also.
Are there any after market options that aren’t cheap plastic?

https://cybertruckco.com/product/cybertruckco-heavy-duty-rock-sliders-w-replaceable-wear-pads/

These have ABS pieces that attach that if get trashed are easily replaceable. Sliders are different than step bars and much nicer than stock. Made in USA for the Cybertruck.

ABS

I know one of the pics looks strange. Wonderful qualities of camera phones. Piece is straight as an arrow.

Sponsored