T-Slot 8020 Roof Rack DIY - 3D Print Your Own

[MrMoparMan]

Are the files updated to most recent version? got some PACF12

Let me work on it.

Sponsored

 

[MrMoparMan]

Are the files updated to most recent version? got some PACF12

Here you go, print with the angled side down.

Hardware:
https://amzn.to/42lam3X

https://drive.google.com/drive/folders/11zDpLeum5E97A1TMoiy-1x70Gsww9_AX?usp=drive_link

 

[MrMoparMan]

Impact to efficiency and range?

With the deflectors, I have no measurable impact to range.

 

[MrMoparMan]

Are these 3d printed too? If so, would you provide files?

Here you go:

Print with the angled side down.

Hardware:
https://amzn.to/42lam3X

Files:
https://drive.google.com/drive/folders/11zDpLeum5E97A1TMoiy-1x70Gsww9_AX?usp=drive_link

 

[MrMoparMan]

Thanks for sharing the files. Just had a friend print the mounting points for a similar rack I’m working on (the original set in the first post).
What hardware did you use to secure the mounting points to the truck?
Cheers

Cool, here is the hardware:

M6 Barrel Nuts 40mm
https://amzn.to/42lam3X

Sponsored