Cybertruck Aftermarket Wheels & Tires Photos + Info Compilation

[BrokenAxle]

T Sportline 22" CT7 paired with Toyo Open Country AT3 EV

Looks awesome!!!

Any chance you have a photo from the front or back showing how much, if at all, this setup extends past the fender flares?

Sponsored

 

[Coldones]

Looks awesome!!!

Any chance you have a photo from the front or back showing how much, if at all, this setup extends past the fender flares?

 

[up_justin]

Above, the newly released UP UP.FIT Forged PD 18" wrapped in a 285/75R18 BFG KO3. Below, the UP UP03 Beadlock 18" in the same tire fitment

 

[Atomic Wheels]

The AWZ2 is such a great design for the Cybertruck that we couldn't limit it to just 20".

That's why today, we have the privilege of sharing the first photos of it in 18"!

 

[2DVS4U]

Weld off-road GRANADA 6 20x9 offset 20+ NITTO 35x12.5R20 Ridge Grapplers tires and wheels from Custom Offsets, custom made aluminum hub spacers by US Custom wheel adapters, the Poke and Lip is just what I wanted.
Dirty Truck I know!

 

[hybrid_eg]

For those not looking to spend arm and leg on wheels i opted for Black Rhino set-up.. I've run their wheels on Jeeps for a long time beating on them in all kinds of conditions with zero issues - so i figure it would work fine for daily CT that doesnt see any action. Granted - Black Rhino doesn't have a dedicated hubcentric CT wheel yet but if you look at the specs you can easily figure out what could fit, which is what i did.

My goal was to have maximum 1" poke over factory so Black Rhino AWOL fit the bill. They are 20X8.5+25 (see pics for exact model number/spec). Same 2650 load rating as stock wheels.
This combined with hubcentric rings provided perfect fitment i was after along with factory size 285/60/20 Falken AT4W's. I think the wheel styling along with AT4W tire/sidewall design matches the looks of CT pretty good. Drives great! Since I went from A/S Pirelli Scorpios to a much heavier tire, despite the wheel being lighter than OEM - based on my calcs the rotating mass difference has increased by about 9lbs per corner. However, those looking to upgrade your OEM A/T set up this wheel is about 12.3lbs lighter than OEM wheel/wheel cover set up; so then it just comes down to tires you are going to run.. AT4W is 10lbs heavier than GoodYear Territory RT's.

My tire shop asked to take some pics for their website so im sharing these as they are better than me taking photos on my Iphone. Btw, PPF is Inozetek Satin Midnight Moss

 

[up_justin]

24x9.5 UP Cybrhex's in bronze on satin white wrapped in Nitto Ridge Grappler 315/45R24's ???

 

[Bumn]

For those not looking to spend arm and leg on wheels i opted for Black Rhino set-up.. I've run their wheels on Jeeps for a long time beating on them in all kinds of conditions with zero issues - so i figure it would work fine for daily CT that doesnt see any action. Granted - Black Rhino doesn't have a dedicated hubcentric CT wheel yet but if you look at the specs you can easily figure out what could fit, which is what i did.

My goal was to have maximum 1" poke over factory so Black Rhino AWOL fit the bill. They are 20X8.5+25 (see pics for exact model number/spec). Same 2650 load rating as stock wheels.
This combined with hubcentric rings provided perfect fitment i was after along with factory size 285/60/20 Falken AT4W's. I think the wheel styling along with AT4W tire/sidewall design matches the looks of CT pretty good. Drives great! Since I went from A/S Pirelli Scorpios to a much heavier tire, despite the wheel being lighter than OEM - based on my calcs the rotating mass difference has increased by about 9lbs per corner. However, those looking to upgrade your OEM A/T set up this wheel is about 12.3lbs lighter than OEM wheel/wheel cover set up; so then it just comes down to tires you are going to run.. AT4W is 10lbs heavier than GoodYear Territory RT's.

My tire shop asked to take some pics for their website so im sharing these as they are better than me taking photos on my Iphone. Btw, PPF is Inozetek Satin Midnight Moss

looks better than stock set up, any difference in ride? any reason why you stayed with 20"

 

[Maaz]

Anyone know if I’ll have rubbing issues with this set up?
I’m thinking of these with method 707s 18x9" 6x5.5, 0mm offset 5.0" Backspace

 

[DMACATX]

Just got them put on. Love the look. Very slight touch of front inner lining at full turn. Can't hear it or even tell. Probably ¼" would need to be trimmed but I think it will be fine as is. I believe it's a +25 offset.

Tell me what you think.

Super light grey PPF wrap next week.

hell yeah. your truck looks sharp! really like that wheel setup.
any updates? got any photos with the wrap?

 

[PATEL]

From https://www.carscoops.com/2025/03/m...-widebody-tesla-cybertruck-on-26-inch-wheels/

26" wheels on this widebody Cybertruck.

 

[Atomic Wheels]

They're finally here! Yes, ladies and gentlemen, the wait is over! Today, we have the absolute pleasure of unveiling the first photos of one of our latest designs for the Cybertruck. Say hello to the AWD! A bold, unique design with an incredible style! ??

 

[CyberNickOH]

Got the CTX bumper installed with 8 pod lights, all HXB, super winch SX12R, 22” CT7 wheels with wild peaks. Satin PPF wrap. Painted and decaled brakes. 1.5” wheel spacers as well. All from @T Sportline

Overall the CTX bumper system install is pretty straightforward. Videos for each step, with took me about 12 hours total. The kit comes with literally everything you need and tons of extras. The only thing I wouldn’t mind having were new push tabs as those break easily. I happen to have extras lying around, but some might not. You can install everything but 2 steps by yourself. The winch plate and bumper. Let me know what you think. I will be definitely adding the rear bumper and side step plates. Unsure on the bull bar, but we’ll see. Big thanks to Brian at @T Sportline for all the help getting the CT to look like this.

 

[Atomic Wheels]

They're finally here—the wait is over! ? We’re excited to share the first photos of one of our newest designs for CT, the AW13! With a stunning diamond cut, this design is nothing short of spectacular!

 

[T Sportline]

We've built many Cybers, but this one is my new fav -- the overall tie in between parts is on point ??

Wrapped in TMaxx Gloss Coffee Crema PPF
Wheel & Tire: 24" CTM Forged Monoblock Wheels & Floating Center Caps custom finished to match wrap/truck
Body: Wide Body in Gloss Carbon Fiber
Paint: Smoothed and Painted Bumpers
Interior: Full Custom Leather & Carbon Fiber
Brakes: Big Brake Kit 6/4 Piston Calipers % Rotors (took picks with CT7 wheels so you can see them!)

Sponsored