? [Update: NOT Production Wiper] New Cybertruck design spied! Shortened front, no door handles, side mirrors, curved windshield glass! [Dec. 10]

[John K]

Nothing shown is a deal breaker for me, I think the bed length is retained with a static overhang section.

Sponsored

 

[Throwcomputer]

Hopefully those are fog lights between the bumper and frunk. Keep the led light bar above windshield and below the frunk lid!

BTW, tailgate looks to be straightish? now instead of angled outward at the top.

 

[WildhavenMI]

Those of you gents with "length-worries" ?‍ The bed was never going to be 8ft. Remember? Pay attention? You got (and will probably still get) to carry a sheet of plywood by dropping tailgate and flipping-up the tail "stop." If you are a serious DIY-guy, weld on a contracting rack like I will... or will that make your manly-truck too "Ain't p'urdy a'nough?"

If that's a 5.5' bed, unless that tailgate is 30" high it won't hold 8' boards. And I highly doubt that the tailgate is that tall tbh. I was amped because it was advertised as a 6/6.5' bed which meant 8'boards could lay flat with a stop.

I carry 8' literally 2-3x week, either in boards, t posts, hog panels, or otherwise. If this can't do that, it is now unfortunately no more useful to me than any other BEV that can pull a utility trailer.

 

[Albern]

First time I've seen identification lights on the CT. If someone else has mentioned it in this thread my apologies. I was just too lazy to read all the posts.....

The amber marker lights were on the top light bar at the reveal, but they were at times obfuscated by the white laser lights as they were on simultaneously.

 

[Jelloiron]

The more they mess with this truck, the less I like it. The current issues I'm having with Tesla are making the decision to stick with Ford that much easier. I have a Tri-Motor reserved and fully intend to upgrade that to the Quad motor but I'm very likely to just sell it as soon as I take delivery.

 

[Throwcomputer]

T track also looks gone with the plastic lined bed. Hoping you can remove the plastic liner to expose the ss bed with t track.

 

[CyberGus]

• Front end is definitely a bit shorter. That wasn’t just an optical illusion.
• Big ass wiper on the driver side.
• Door handle gone
• Curved front window looks hot.
• Is it just me or is the top of the cabin smaller?

Big "ass wiper"???

 

[Caliche_Roads]

I'm surprised by the fact it has 6 bolt wheels vs the 7 bolt of the 1st prototype. Maybe they've dialed down the gross vehicle weight too?

 

[TruckElectric]

The amber marker lights were on the top light bar at the reveal, but they were at times obfuscated by the white laser lights as they were on simultaneously.

Looked again at the reveal and just forgot about it since it's been awhile since I watched it.

I should have said "first time I've seen the identification lights in the grill area." LOL

 

[CyberGus]

Right now I'm checking Anco for any 83" wiper blades

 

[Jeepster]

I must have mine!!!

 

[TruckElectric]

Right now I'm checking Anco for any 83" wiper blades

My guess is they will be expensive to replace.

 

[John K]

My guess is they will be expensive to replace.

Not for southern Californians

Sponsored