Cybertruck bricked

[Crissa]

12V operation is limited due to the control module needing to boost it to the 48V bus voltage.

https://www.tesla.com/ownersmanual/cybertruck/en_us/GUID-2C9FAB79-5A7B-40BB-B572-D10CDF7661E6.html

Yes, but it does reboot it.

I'm not sure how much power you'd need to have to replicate the low voltage battery, though.

-Crissa

Sponsored

 

[Alex509]

Good day everyone. A useful hint for jump start the cybertruck: you may use scooter li-ion 36v battery with attached crocodile clamps. When fully charged it provides 42V DC which is enough to power up the car and close hv battery contactors. These batteries and charges (42VDC) are available at Amazon with a search word "36v liion battery for scooter".
Pls keep in mind that frunk operates from 12-16VDC so you still need a normal 12vDC jumpstart to open it if car 48v system died.

With kind regards,
Alex

 

[Simlocation]

MID VOLTAGE LEFT
HAND
CONTROLLER(1814265-
11-E
If you change it yourself I understand you will need to re-do your card keys as well.

I’m left with redoing the keys. Do you know any company that can do it?

 

[mongo]

Good day everyone. A useful hint for jump start the cybertruck: you may use scooter li-ion 36v battery with attached crocodile clamps. When fully charged it provides 42V DC which is enough to power up the car and close hv battery contactors. These batteries and charges (42VDC) are available at Amazon with a search word "36v liion battery for scooter".
Pls keep in mind that frunk operates from 12-16VDC so you still need a normal 12vDC jumpstart to open it if car 48v system died.

With kind regards,
Alex

You can use the same MV jump pack to open the frunk
https://www.tesla.com/ownersmanual/cybertruck/en_us/GUID-4EC0FD18-0503-40FD-8C97-0F6BB39DA79D.html

 

[mongo]

I’m left with redoing the keys. Do you know any company that can do it?

Tesla has time based subscriptions to Toolbox for DIY.
@TorqMonstr might be able to help also.
https://service.tesla.com/docs/Cybe...UID-9BBBE423-ACE1-47E5-8089-552366FF5A1C.html

 

[Simlocation]

Tesla has time based subscriptions to Toolbox for DIY.
@TorqMonstr might be able to help also.
https://service.tesla.com/docs/Cybe...UID-9BBBE423-ACE1-47E5-8089-552366FF5A1C.html

yes toolbox work, but i cant pair new keys, since i swap the vcleft i docents work

 

[mongo]

yes toolbox work, but i cant pair new keys, since i swap the vcleft i docents work

Oh, the pair key routine isn't working (along with one or more of the previous routines) ?

 

[Simlocation]

Oh, the pair key routine isn't working (along with one or more of the previous routines) ?

isn't working because it need a special toolsbox authentication i think only SC and official tesla repair centers can do it

 

[mongo]

isn't working because it need a special toolsbox authentication i think only SC and official tesla repair centers can do it

Interesting, I would have thought it was restoring from a trusted source so additional authentication wouldn't be needed. Guess not?

 

[Alex509]

You can use the same MV jump pack to open the frunk
https://www.tesla.com/ownersmanual/cybertruck/en_us/GUID-4EC0FD18-0503-40FD-8C97-0F6BB39DA79D.html

We tried this also but rarely working. 12v battery even from cordless drill is doing the job to open a frunk

 

[Alex509]

yes toolbox work, but i cant pair new keys, since i swap the vcleft i docents work

You can add a key card from tesla app if car is binded to yr account.

 

[Simlocation]

You can add a key card from tesla app if car is binded to yr account.

when you swap the vcleft keys stored get lost.

Sponsored