Sponsored

Mrp911

Well-known member
First Name
Michael
Joined
May 22, 2021
Threads
14
Messages
169
Reaction score
387
Location
Vista Ca
Vehicles
Model 3, CyberBeast Vin164
Occupation
Retired
Country flag
Your issue sounds like it needs recalibration. Look for a post about that
If I pull on a slat it does close. It is close. Will review calibration post again as well. Will probably start with the height adjustment.
Sponsored

 

wtibbit

Well-known member
First Name
Wayne
Joined
Aug 27, 2020
Threads
12
Messages
819
Reaction score
1,617
Location
DFW
Vehicles
Cybertruck AWD FS, Mercedes sedan, Corvette coupe, 1968 Cougar XR-7
Occupation
Retired Engineering Program Director
Country flag
One of the Tesla technicians was kind enough to take a look and tell me the process necessary to perform the adjustment myself. This video will show you that process.

Thanks! Very well done.
 

BBradac9

Well-known member
First Name
Brian
Joined
Dec 21, 2023
Threads
6
Messages
72
Reaction score
38
Location
Birmingham, AL
Vehicles
Cyberbeast, Model X, SR22, G650
Occupation
Pilot
Country flag
Thought maybe this was why my tonneau was binding a few inches short of closing so I pulled the cover off this evening. The right bolt was barely tight and the completely wrong bolt. Also my seal is trashed from someone trying to jam it in when they were building the vehicle. Unfortunately my tonneau continues to bind after calibration and removing the forward cover completely. Guess I’ll add some more items for my service visit.
 

Snowball

Member
First Name
Jim
Joined
May 27, 2020
Threads
0
Messages
8
Reaction score
13
Location
Frisco
Vehicles
F150 Raptor
Occupation
Cloud Solution Architect
Country flag
Thought maybe this was why my tonneau was binding a few inches short of closing so I pulled the cover off this evening. The right bolt was barely tight and the completely wrong bolt. Also my seal is trashed from someone trying to jam it in when they were building the vehicle. Unfortunately my tonneau continues to bind after calibration and removing the forward cover completely. Guess I’ll add some more items for my service visit.
Any update on your service center visit?

I have the same issue with the tonneau stopping a 6-8 inches short and then backing up a couple inches. I have done calibration a few times and it works fine 1-2 more times and then stops short again.
 

BBradac9

Well-known member
First Name
Brian
Joined
Dec 21, 2023
Threads
6
Messages
72
Reaction score
38
Location
Birmingham, AL
Vehicles
Cyberbeast, Model X, SR22, G650
Occupation
Pilot
Country flag
I’ll post my service ticket but it says they verified my concern and fixed “line 1” calibrated and tested good. It has not jammed while closing again but it definitely isn’t shutting uniformly. Probably schedule it again at another point. I don’t think service is up to speed yet in cybertruck. Better to let the initial flood of trucks overwhelm Mx and take it in later I think.
Sponsored

 
 








Top