New Truck owner with somewhat distorted windshield concerns.

[Cyberbro]

So Far I'm loving my truck, I'm getting the OEM light bar next week and have done the all Mats and a bunch of OEM accessories that are very basic. I do have one concern, after reading lots of posts online and countless YouTube videos it seems to me that all CT's have some windshield distortion, I see it on mine but not sure I want it replaced in case it gets worse, because right now I see it but its not earth shattering. Is everyone else landing in the same place as I am on the windshield?

Sponsored

 

[ChiTownCT]

I have no sign of any windshield distortion, to be honest I've never heard of that problem before..

 

[Mini2nut]

It's a labor intensive process to replace the windshield. Unless it disturbs your vision I would not have it replaced.

Accessing the Area: The front doors and frunk are opened, and power to the vehicle is disabled or placed in Service Mode.

Trimming & Harnesses: Technicians carefully remove the front header trim, A-pillar covers, windshield wiper arms, and the front overhead console.

Electronics Disconnect: The forward-facing camera assembly, rearview mirror, and electrical harnesses for the windshield heaters and GNSS antenna are unplugged.

Glass Removal: The old urethane is cut and the windshield is lifted from the frame using specialized suction cups.

 

[59K]

There’s another thread in the subchannel regarding this topic. I picked up the $59K DM 2 weeks ago, and it’s pretty bad. I would say the whole bottom right quadrant has the warped distortion. I am scheduled for service next week.

https://www.cybertruckownersclub.com/forum/threads/windshield-wavy-windshield-waviness.59407/

 

[59K]

It's a labor intensive process to replace the windshield. Unless it disturbs your vision I would not have it replaced.

Accessing the Area: The front doors and frunk are opened, and power to the vehicle is disabled or placed in Service Mode.

Trimming & Harnesses: Technicians carefully remove the front header trim, A-pillar covers, windshield wiper arms, and the front overhead console.

Electronics Disconnect: The forward-facing camera assembly, rearview mirror, and electrical harnesses for the windshield heaters and GNSS antenna are unplugged.

Glass Removal: The old urethane is cut and the windshield is lifted from the frame using specialized suction cups.

I debated whether or not to address the issue because it is so labor intensive and wouldn’t want future creaks and leaks with tinkering with the original windshield, but my windshield is very noticeable and I cannot unsee the distortion whenever I look to the right.

 

[comet2]

I do see it on my windshield on the passenger side if the light hits it right at certain angles. Not enough to bother me. I read if you tint the windshield it gets a bit more enhanced. I am about to find out for myself. Tint scheduled for Tuesday.

 

[Jerry33]

All car and truck windshields have some distortion depending upon where you are looking. I don't find the Cybertruck's noticeable.

 

[59K]

All car and truck windshields have some distortion depending upon where you are looking. I don't find the Cybertruck's noticeable.

That’s great and all but this doesn’t help any of the cybertruck owners who do have the issue.

Photo of distortion comparing front windshield and the side triangle on Highway. You can clearly see the distorted waves along the guard rail compared on the front windshield. The cement wall straight lines are all distorted and wavy too:

 

[CyberSav]

All car and truck windshields have some distortion depending upon where you are looking. I don't find the Cybertruck's noticeable.

No, all cars really don't have this problem. Cheaper cars tend to have this problem. As do Teslas.

But go hop in any new Mercedes or BMW etc and the glass is crystal clear.

Sponsored