Tesla MOLLE Panels & Divider installed in Cybertruck bed! 😍

[Gigahorse]

If it attached and released fairly quickly I think a good amount of people would go for it assuming the leverage on the attachment points could handle 150lbs or so banging into it as people launch and break ferociously.

Sponsored

 

[Eddyrelik]

I really wanted to get the bed divider, but I noticed its metal so it may be heavy to move around. Also, its very tight on the bottom, so if I get a Bed Mat, it wont fit.

 

[roglewis]

What are the MOLLE panels for? They look good... do they serve a functional purpose?

 

[charliemagpie]

What are the MOLLE panels for? They look good... do they serve a functional purpose?

tie down bric a brac.. and bits and pieces you want. Mentioned above,, shovel recovery gear..

I may add a tube for fishing rods.(or off the rack) Hopefully, it's strong enough to hold some boxes for small stuff... reels etc.

I am really hanging out for a great roof rack... now I've upped the anti, and wish for a rack bracket to flush mount a Starlink flat dish.

 

[WHIZZARD OF OZ]

Eyeing off that sunshade from Day 1.
Aussie Sun is M U R D E R.....Like an attack of C R O W. ?
I'm picturing an Alcantara interior including 'Squirkle', door cards, dash and if possible, perforated seat inserts for a KOOL Bum. Maybe an aftermarket/upholstery job for a 'fist full of $$$$'.
Originally, l was keen to break the 'Black' cabin with 'White' like the CYBERBEAST FS, but now l'm leaning to an interior without 'glare'.

 

[WHIZZARD OF OZ]

9 times out of 10 my grocery run will fit into the frunk. I want need that divider anyway!

From my time on these pages, l conclude people are generally 'D-I-V-l-D-E-D'

 

[HaulingAss]

Hopefully someone will come up with a bed liner; bed floor looks pretty beat-up.

Huh? People say the darndest things!

Cybertruck doesn't need no stinkin' bedliner. Save your money. It's a lot tougher and more practical than the painted steel in the bed of my F-150.

 

[TickTock]

First look at the Tesla MOLLE Panels and divider installed in the Cybertruck bed! Posted by @allenveach

Thanks for sharing. Looks like a very useful accessory if you don't want things sliding around in the bed but I was wondering about the attachment. I assume it is only at the top and it appears to be about 3" wide (unless there is a longer torque arm on the other side - I am assuming symmetry). Wondering how it would fare against the resultant torque with, say, a bag of cement+beast mode... What is the material?

 

[FarAway]

While that molle panel looks nice, I could get by with a cargo net similar to below.
The advantages i see, it is lighter and easier to handle, not attached to bed so I can still slide things underneath, easier access since it can be placed closer to the tailgate and it will still allow access to the underbed storage compartment while in place.

 

[DumpsterFire]

LOL, that's all frunk stuff. A divider would mostly get in the way in the bed. It's going to be hard enough adjusting from having an 8' one for decades.

Pfffft. My frunk gonna be full of golf clubs that I can use to lose copious amounts of dollars to my friends! ?

 

[Bkb13]

While that molle panel looks nice, I could get by with a cargo net similar to below.
The advantages i see, it is lighter and easier to handle, not attached to bed so I can still slide things underneath, easier access since it can be placed closer to the tailgate and it will still allow access to the underbed storage compartment while in place.

I have something similar to this in my truck. Not a fan of moving it to the cybertruck.

That version has 4 attachment points on top, but then it won’t stop anything from sliding on the bed floor. Things will just slide right under that net.

 

[Jimbo Ringo]

From my time on these pages, l conclude people are generally 'D-I-V-l-D-E-D'

And not willing to adjust!

 

[Bartman]

A good rubber bed mat helps keep many things from slip-sliding all around.

 

[PilotPete]

I'm thinking an old school Dodge shaker hood over the frunk.

NOT!

 

[SentinelOne]

Don't own a hi-lift so can skip that....shovel and traction boards and tow rope good enough to get unstuck in a snow storm (mostly to save other idiots).

But like where your head is at, you should work for Unplugged...

Sponsored