I don’t think you need PPF protection. The steel panels hard to damage

[Celiboy]

At the current rate, having a non-wrapped CT will be the unique option.

Ain’t that the truth! ?

Sponsored

 

[Gurule92]

I think people considering PPF are aware that things can buff out

The concerns instead I think are about too frequently - for their aesthetic tastes - needing to buff out the stainless against staining/fingerprints/scratches




Just like I know my expensive stainless kitchen pans *could* gleam like new if I used BKF ever time I cooked

If I see BKF one more time lol

 

[ideaXfactory]

Chert, or a diamond or hard stone on a persons ring come to mind as things that can scratch the Stainless surface. Also, the rivets on the back pockets of Levi jeans might... They are very hard and can certainly scratch 304 anyway.

 

[Cyber Man]

Chert, or a diamond or hard stone on a persons ring come to mind as things that can scratch the Stainless surface. Also, the rivets on the back pockets of Levi jeans might... They are very hard and can certainly scratch 304 anyway.

Dang! Shelling out 100K was not good enough; Now I have to wear 100% cotton yoga pants around CT.

 

[HaulingAss]

Chert, or a diamond or hard stone on a persons ring come to mind as things that can scratch the Stainless surface. Also, the rivets on the back pockets of Levi jeans might... They are very hard and can certainly scratch 304 anyway.

The rivets on Levis are too soft to leave a scratch on the Cybertruck. 304 stainless is much softer than Tesla's hard frickin' steel!

 

[ideaXfactory]

Yes I know, but have seen it happen on work hardened stainless that has been knuckled. The HFS process would be similar. So what I've seen may be from stainless rivets in clothing. I was hopping it would be as hard as A7 but that appears to not be the case. Do we have an exact Mohs hardness number yet? But regardless, chert rock is everywhere. And a PPF would protect against such scratches.

I do own an industrial tester, so eventually will find out the exact hardness. By now I already know it will be less than 7.

 

[countryboy]

Agree that the PPF is not needed for protection, but SOMETHING is needed for fingerprints IMO. Lot of other/cheaper options out there.

But, is it? I'm thinking the first 2 weeks of CT ownership is stopping in populated areas and letting EVERYONE touch it, all over. Goal: even fingerprint distribution across the entire truck. Consider it fingerprint camo. New fingerprints don't stand a chance of being noticed! Just be careful washing not to remove the even coating.

 

[cvalue13]

If I see BKF one more time lol

this already strange saga only getting more strange, e.g.:

fanboi: “stainless panels mean that *real* trucks won’t get scratches, dents, or look messy, and won’t need fussy maintenance like paint does”

my grandfather: “since when did *real* truck people care so much about all that?”

fanboi: “but this is the future, where real-real truck people are wiser”

CT recipient: “actually the stainless is kind of fussy afterall, especially aesthetics-wise - but regular application of BKF keeps it fresh, like your pots and pans”

fanboi: “but why bother, real truck people don’t care if their truck is rough looking, it’s called patina, and it’s beautiful”

my grandfather: *squints at fanboi*

 

[smggsm]

Love it! Thanks for sharing. Do you think this type of damage could have caused a small dent if it was not stainless steel?

All insurance claims for me have been only for small dents! I’m hoping CT will save me on the insurance for minor dents.

I think so .. it's really hard to damage.

 

[HaulingAss]

Chert, or a diamond or hard stone on a persons ring come to mind as things that can scratch the Stainless surface. Also, the rivets on the back pockets of Levi jeans might... They are very hard and can certainly scratch 304 anyway.

According to Levi Jeans, their jean rivets are made of copper. Copper has a Mohs harness of around 2.5-3.0 and can't even come close to scratching the hardened stainless steel the Cybertruck is made of. Spreading fud about Levis scratching Cybertruck is ridiculous. Levi's don't even have rivets on the back pockets since the 1960's. Because they were scratching wood furniture.

Yes, a diamond ring can scratch the Cybertruck, diamonds can scratch anything below 10 on the hardness scale. Which is pretty much everything else.

 

[ideaXfactory]

According to Levi Jeans, their jean rivets are made of copper. Copper has a Mohs harness of around 2.5-3.0 and can't even come close to scratching the hardened stainless steel the Cybertruck is made of. Spreading fud about Levis scratching Cybertruck is ridiculous. Levi's don't even have rivets on the back pockets since the 1960's. Because they were scratching wood furniture.

Yes, a diamond ring can scratch the Cybertruck, diamonds can scratch anything below 10 on the hardness scale. Which is pretty much everything else.

I'm also talking about chert, not diamonds. 7 is the number I think it likely doesn't obtain. Levi was an example of rivets in clothing, but the point is that clothing does sometimes have rivets, zippers, etc. Do you have any actual experience with this or are you just googling hardness and are full of Tesla FUD?

 

[countryboy]

I'm also talking about chert, not diamonds. 7 is the number I think it likely doesn't obtain. Levi was an example of rivets in clothing, but the point is that clothing does sometimes have rivets, zippers, etc. Do you have any actual experience with this or are you just googling hardness and are full of Tesla FUD?

Sir, do you know what FUD is? They are saying not to worry about jeans rivets.. that is the opposite of FUD. Actually, you were making unfounded claims about how those things WILL scratch, without any real proof. Also claimed you KNOW it will be hardness under 7, with no proof. Essentially saying that until we have proof they don't scratch, we should live in fear of that being a possibility - FUD.

 

[HaulingAss]

I'm also talking about chert, not diamonds. 7 is the number I think it likely doesn't obtain. Levi was an example of rivets in clothing, but the point is that clothing does sometimes have rivets, zippers, etc. Do you have any actual experience with this or are you just googling hardness and are full of Tesla FUD?

No, your point was that the rivets on Levi's could scratch the Cybertruck. It's false. The rivets can't even scratch glass and glass is significantly softer than the hardened steel the Cybertruck panels are made with. The only FUD being propagated here is yours.

FYI, "FUD" stands for "fear, uncertainty and doubt" and "FYI" stands for "For Your Information".

 

[eunoia]

I bought a roll of PPF for the door edge for the area most frequently prone to fingerprints. Of course, it is for a future Cybertruck I have reserved but not even ordered

Where did you get the roll from? My concern with partial PPF is that over time, there will be color variation between the area that is covered and the other areas. I am strongly considering PPF for the front of the frunk because of the bug gut stains but i don't want to pay a bunch to installer...

 

[65SoYoLO]

I do own an industrial tester, so eventually will find out the exact hardness. By now I already know it will be less than 7.

Looking forward to hearing the results!

Sponsored