FSD squircle nag at night?

[ABILISK]

Since v14, CT has been displaying “hands free mode disabled. Low cabin illumination” during night drives, causing a reversion back to applying torque to the squircle every 30 seconds or so. Model Y doesn’t do it, but CT does. CT v13 never did that, so either something got jacked up with my cabin cam right when I got the update or CT is still being more finicky than the sexy cars.

How’s yours behaving in the darkness?

Sponsored

 

[HaulingAss]

No problems in the dark. It's really rare for me to get nags anymore. I think it can see better than I can when it gets really dark.

 

[CyberShawnA]

Two suggestions:
On the Service menu > Camera preview to see if the camera can see you in the dark.
Use your cellphone camera in low lighting pointed at the cabin camera.
Do you see the 2 purple lights?
They are the infrared lights…

 

[CyberGus]

Are you wearing a high-vis jacket?

The nags increase when the camera can’t properly resolve your eyes. Check out the interior-camera preview in the dark.

 

[ABILISK]

Two suggestions:
On the Service menu > Camera preview to see if the camera can see you in the dark.
Use your cellphone camera in low lighting pointed at the cabin camera.
Do you see the 2 purple lights?
They are the infrared lights…

Thx. I’ll check it out.

 

[ABILISK]

Are you wearing a high-vis jacket?

The nags increase when the camera can’t properly resolve your eyes. Check out the interior-camera preview in the dark.

No highlighter clothing, just normal stuff. Don’t know why it started freaking out.

 

[JCERRN]

I haven't noticed anything very different regarding nag at night so far.

 

[Ruffles]

I've always gotten nags at night. 14.1.7 seems a little better in that regard but not much. Do you wear glasses? I do. I wonder if the IR is less effective with glasses?

 

[Peace]

I've always gotten nags at night. 14.1.7 seems a little better in that regard but not much. Do you wear glasses? I do. I wonder if the IR is less effective with glasses?

 

[Peace]

Also check your visor that it isn't blocking the camera view, 401k

 

[hemiarch]

Get some lighting up in there. I haven’t had that issue but there is a bit more lighting than most cabins in cyberbandit.

 

[That Beast Mode]

Since v14, CT has been displaying “hands free mode disabled. Low cabin illumination” during night drives, causing a reversion back to applying torque to the squircle every 30 seconds or so. Model Y doesn’t do it, but CT does. CT v13 never did that, so either something got jacked up with my cabin cam right when I got the update or CT is still being more finicky than the sexy cars.

How’s yours behaving in the darkness?

My experience is the opposite actually. The other day when I was using v14 it was the first time I've ever been able to complete a drive at night using FSD without getting a single nag. My experience may differ though, I had an issue with my interior cabin camera that was replaced and the SC recently did that interior forward camera cleaning thing. I have never been able to do this before - however I don't know where the fault was, v13 or other things mentioned.

 

[Daystin]

Get some lighting up in there. I haven’t had that issue but there is a bit more than lighting than most cabins in cyberbandit.

No problems in mine either. I do have my Display set to 100% brightness instead of Auto; so that should be sufficient for camera to see me.

 

[ABILISK]

Get some lighting up in there. I haven’t had that issue but there is a bit more than lighting than most cabins in cyberbandit.

But what if I want my truck to remain a dark pit of despair?

 

[hemiarch]

But what if I want my truck to remain a dark pit of despair?

I bet starbase has an employee program for that very thing.

Sponsored