Vault Build Completed - Too Much?

[MICyber]

Looks clean, how did you attach the Molle Panel Rubber Clamp to the Molle slots?

Item #30 in the list. A respondent above (hemiarch) has a few links too.
https://www.amazon.com/gp/product/B0DTVYVN3Q

Sponsored

 

[Friday]

I just want to suggest to the Molle and vault stocking peeps is how absolutely useful these Gorilla Tubtrugs flexi buckets are in the field. They are virtually indestructible (I fill them with rock debris and other sharp heavy items) and they never puncture. They flex to a pouring funnel to precision pour liquids and they bend enough to shove them under leaks for mess control.
There a a multitude of sizes, I have the 10 gal and 3.5 gal, someone walked off with my 9 gal shallow one.
Do not get the brands out of Tractor Supply, the handles rip off. TubTrugs is the only ones that are worth anything. They may be shipped from England depending on how you order.

 

[CTSoFL]

This has been a slow build over 6 months but I think I'm finished for now. I have a build spreadsheet uploaded to my google drive which you can view at the following link:



A few photos are with the shelf in the original location before lowering. I bought the pelican box and though there would be clearance of the tonneau cover. I was wrong so I was determined to make it work. I fabricated a way to lower the self about 2 5/8". Now the clearance is about 1". I have yet to paint or powder coat the aluminum c-channel brackets. I bought a 24" aluminum c-channel piece locally rather than on amazon.

I tried to avoid as much as possible to not block the bed lights. I drive with the tonneau cover always closed an use a LCD mirror. You can see the camera on the rear crossbar underside. The front crossbar has a Hella Black magic 50" single row light bar & a CB antenna.

Let me know what you guys think, Too much?

When does the zombie apocalypse start?

 

[CyberTruckeeTheOne]

You are ready for zombie apocalypse.

Double check to see if your bio-hazard shield is working.

 

[jsteelo21]

Love it! Awesome job.

 

[dorylee]

looks cozy

 

[WHIZZARD OF OZ]

This has been a slow build over 6 months but I think I'm finished for now. I have a build spreadsheet uploaded to my google drive which you can view at the following link:



A few photos are with the shelf in the original location before lowering. I bought the pelican box and though there would be clearance of the tonneau cover. I was wrong so I was determined to make it work. I fabricated a way to lower the self about 2 5/8". Now the clearance is about 1". I have yet to paint or powder coat the aluminum c-channel brackets. I bought a 24" aluminum c-channel piece locally rather than on amazon.

I tried to avoid as much as possible to not block the bed lights. I drive with the tonneau cover always closed an use a LCD mirror. You can see the camera on the rear crossbar underside. The front crossbar has a Hella Black magic 50" single row light bar & a CB antenna.

Updated photos: Moved the flares and machete to the shelf and added the second flashlight.

Let me know what you guys think, Too much?

That's ONE extensive list of STUFF.
Looks AMA2!NG...... Guessing you couldn't HELP YOUR_SHELF

 

[MICyber]

That's ONE extensive list of STUFF.
Looks AMA2!NG...... Guessing you couldn't HELP YOUR_SHELF

I'm trying to keep it somewhat classy haha. Keeps me busy...

 

[MICyber]

That's ONE extensive list of STUFF.
Looks AMA2!NG...... Guessing you couldn't HELP YOUR_SHELF

Thanks! Once I had committed to the molle panels that ruled out the Tesla tent. Then I wanted a spare but that introduced wasted space above the tire. I think I'm done with the vault.

 

[Thunderstrike44]

This has been a slow build over 6 months but I think I'm finished for now. I have a build spreadsheet uploaded to my google drive which you can view below:



A few photos are with the shelf in the original location before lowering. I bought the pelican box and though there would be clearance of the tonneau cover. I was wrong so I was determined to make it work. I fabricated a way to lower the self about 2 5/8". Now the clearance is about 1". I have yet to paint or powder coat the aluminum c-channel brackets. I bought a 24" aluminum c-channel piece locally rather than on amazon.

I tried to avoid as much as possible to not block the bed lights. I drive with the tonneau cover always closed an use a LCD mirror. You can see the camera on the rear crossbar underside. The front crossbar has a Hella Black magic 50" single row light bar & a CB antenna.

Updated photos: Moved the flares and machete to the shelf and added the second flashlight.

Let me know what you guys think, Too much?

I think you did a great job!
Want to do mine Lol?

 

[MICyber]

I think you did a great job!
Want to do mine Lol?

haha only a couple hours away

 

[Aces Deuce's]

You forgot the High-Lift Jack....

Hi-Lift® X-treme Jack - Hi-Lift Jack Co.

 

[MICyber]

You forgot the High-Lift Jack....

Hi-Lift® X-treme Jack - Hi-Lift Jack Co.

I actually have one and toyed with hanging it from the self. I did not want to overload the self/L-track. We'll see...

 

[Leifmb]

I think it takes away from the utility of the bed. For me, I’d put ALL the stuff hanging in display on the side mole panels in the cargo vault and call it a day. No extra pelican cargo box, no bed mat that makes it harder to access the storage area below (and bed hooks), no horizontal shelf and no spare unless off-roading.

 

[PhilEsq]

Nice! I would like to do some of that.

Sponsored