As a professional vinyl wrap shop - pricing…

[resellpanda88]

$100/hr is not unreasonable at all. I'd gladly pay it but how many hours does it take to wrap a CT by a professional?

A diy project would take you and I two days. Let's say a pro can knock it out in 10 hours. That would be about $1000 in labor and $1000 in material? $2000 total if gladly pay. But some shops are quoting upwards of $5000+ that's about $4000 in labor.

Granted prices have come down a bit since I started searching for a shop. I've been getting $3,850-$4,000. If I look hard enough I can still find $5,500-$6,000

Sponsored

 

[Mini2nut]

Owners need to remember that a vinyl wrap is a thin decal. It's eventually going to suffer stone pits, tears, peeling around edges, etc.

If I were to consider a wrap I would choose PPF over vinyl as its way more durable over the long run.

 

[panthar]

CyberTruck is the easiest thing to wrap , beleive me, I did it. No stretching required.

I had 0 experience to wrap anything, yes it takes time. 20-30 hours. But its satisfying to do this DIY project. You can watch on my youtube video below in signature. its 100 % DIY.

 

[yishen]

Look, $100 an hour sounds like a lot until you try cutting vinyl around a headlight or door handle without slicing the paint underneath. It's an artisan skill. That 30 hours of labor is just the time the final application takes; it doesn't include the 8 hours of disassembly, cleaning, panel prep, and reassembly.

I'd rather pay $5k once than $750 for materials, waste another $750 trying and failing myself, and then still have to pay a pro $4k to fix the mess.

When you buy a wrap, you're buying a warranty against lifting and bubbles, which is impossible to get doing it yourself in a dusty garage. Just find a reputable shop. I know a lot of guys here use Tinterz.

 

[Jimo]

As a professional shop, how would you explain to your customers your pricing? What I mean is if you’re charging $4500 or $5000 for a vinyl wrap do you write out the labor hours and also the parts pricing? Or is it just a flat fee and that’s what it is? I was seeing yesterday somebody asking about pricing on a forum and they were looking for cheaper alternatives and one shop owner replied, spend the 30 hours to do it yourself and then when it’s not right then you’ll have to go pay a professional to do. Which got me thinking. When I read that. If it’s taking a professional shop 30 hours to install a vinyl wrap that probably wholesale cost them $750 maybe $800. I don’t know I could be wrong. Say something I can Avery or 3M or whatever the final wrap people are. So you’re saying the labor is probably $4000 for 30 hours so that’s easily over $100 an hour. It sounds like a lot right? I mean, are you making $100 an hour I mean don’t answer that you might be since you have a cyber truck. Or a lawyer or a doctor or something like that. But still in my opinion a over $100 an hour seems like a lot. Maybe it’s not maybe I’m ignorant anyone have any experience or want to chime in and explain it might help me and others that are looking at wraps and trying to understand our pricing? Perhaps it’s taking more than 30 hours maybe it’s a 70 to 90 hour job I don’t know. I think that there’s a lot of ignorance in this and somebody that’s a professional chiming in and giving out that information would help others understand why the prices are what they are opposed to oh we know it only cost $750 for the role. Why is it costing us now $5000 for the install so you understand where I’m coming from I think that would be great information at least for me it would be it would help me make a better decision. I would do it myself just for the shits and giggles about it but my garage you know with the dust and all that just is not something that would work

As a professional handyman, I know my limitations so I got quotes ranging from $1,600 to $10,000!
I visited each shop, asked questions, and chose the one I felt the most enthusiasm and attention to detail. It was $3,200.00. I was extremely satisfied and would refer him to anyone!
By the way, as a handyman, I would automatically provide materials and labor pricing; but if the customer tried to tell me that shop "B" would do it for less and could I lower my price, I would say, "I think shop "B" is who you should use!"

 

[hemiarch]

Skills, right the first time or they eat the cost for the second third till your happy.

Except they don’t because they are often dickheads who think applying stickers and neurosurgery are very similar and who feel they can do no wrong. They also know that unless you’re a mega-influencer you have no recourse and can’t really do damage to their marketing. What are you gonna do? Give them a bad Yelp review? Tell three of your besties that weren’t gonna wrap a car anyway?
They also buy materials in bulk and the ones I’ve seen pay employees shamefully low rates. There is no paint booth with OSHA standards or insurance claims department or specialized mechanic certification. No parts desk. Only a bunch of children who go to SEMA and get drunk on company money. That’s not always the case, but it’s frequent so the excuse about having a giant overhead and customer service shrinkage costs doesn’t always hold water.
Caveat Emptor, not exactly a well regulated service industry.
I’m certain there are great professional conscientious shops out there but dropping five big ones doesn’t guarantee you found one.

Sponsored