PSA: Be Careful With Air Suspension Automatic Lowering! Have clearance under truck & bumpers - to prevent damage like this
- Thread starter Scribbious
- Start date
- Watchers 14
OP
OP
Scribbious
Active member
- First Name
- John
- Joined
- May 25, 2020
- Threads
- 1
- Messages
- 38
- Reaction score
- 87
- Location
- Tallahassee, Fl
- Vehicles
- Current: Cybertruck Previous: 2020 MY 2018 M3
- Occupation
- Small Business Owner
- Thread starter
- #62
Repair Completed!
I was able to get the part ordered from our local Tesla approved body shop. Thank you Hendrick Auto! About $600 after taxes, etc.
The part fit in the back of the truck with the Tonneau cover partly open to accommodate the dimensions.
Following the instructions in the Tesla online manual was pretty straight forward though the 30 minute shop time estimate is pretty optimistic if you've never done it before. Probably had a couple of hours into it.
Probably the biggest surprise (which shouldn't have been in retrospect) was moving the wiring harness from the old part to the new part.
Found a bit of additional damage to a metal part (shown in one of the pictures) but was able to remove it and coax it back into shape. I don't think it creates a safety issue. Only meant to support the 'step' below the license plate.
(The damage - See original post for how it happened)
(The Part)
Removal of Fairing (note wiring harness and connected part)
(Damage to Step - Probably a cheap part but decided to fix rather than replace)
(Repaired and painted Step)
(Finished!)
(Note tires. A thread to come =)
I was able to get the part ordered from our local Tesla approved body shop. Thank you Hendrick Auto! About $600 after taxes, etc.
The part fit in the back of the truck with the Tonneau cover partly open to accommodate the dimensions.
Following the instructions in the Tesla online manual was pretty straight forward though the 30 minute shop time estimate is pretty optimistic if you've never done it before. Probably had a couple of hours into it.
Probably the biggest surprise (which shouldn't have been in retrospect) was moving the wiring harness from the old part to the new part.
Found a bit of additional damage to a metal part (shown in one of the pictures) but was able to remove it and coax it back into shape. I don't think it creates a safety issue. Only meant to support the 'step' below the license plate.
(The damage - See original post for how it happened)
(The Part)
Removal of Fairing (note wiring harness and connected part)
(Damage to Step - Probably a cheap part but decided to fix rather than replace)
(Repaired and painted Step)
(Finished!)
(Note tires. A thread to come =)
DumpsterFire
Well-known member
- Joined
- Oct 26, 2023
- Threads
- 12
- Messages
- 755
- Reaction score
- 2,225
- Location
- Utah
- Vehicles
- Model 3
- Occupation
- Mouth Breather
Nice man! Glad it all worked out and didn’t cost you thousands!!Repair Completed!
I was able to get the part ordered from our local Tesla approved body shop. Thank you Hendrick Auto! About $600 after taxes, etc.
The part fit in the back of the truck with the Tonneau cover partly open to accommodate the dimensions.
Following the instructions in the Tesla online manual was pretty straight forward though the 30 minute shop time estimate is pretty optimistic if you've never done it before. Probably had a couple of hours into it.
Probably the biggest surprise (which shouldn't have been in retrospect) was moving the wiring harness from the old part to the new part.
Found a bit of additional damage to a metal part (shown in one of the pictures) but was able to remove it and coax it back into shape. I don't think it creates a safety issue. Only meant to support the 'step' below the license plate.
(The damage - See original post for how it happened)
(The Part)
Removal of Fairing (note wiring harness and connected part)
(Damage to Step - Probably a cheap part but decided to fix rather than replace)
(Repaired and painted Step)
(Finished!)
(Note tires. A thread to come =)
Sponsored
Similar threads
