Video: Cybertruck Vents Air Suspension Pressure While Lowering! 💨 + Close Look at Bed Vault!

[Crissa]

Is that why I try to load some pages and it says they won't load? Interesting. Perhaps I've been blocked as well lol

Sometimes pages don't load. And if a post was deleted or whatever, you'll get threads that look unread but doesn't contain new posts.

The bed looks far more finished than any previous truck since the prototype. Betas just looked like cheap plastic was shaped around the 4WS. This one has clean lines, much better.

Of course! Alot of the plastics on the beta trucks would have been placeholders. Now that we're at the RCs they should be getting to the final fitments, even the right kinda of molds and materials instead of one-off samples or prints.

-Crissa

Sponsored

 

[Foxx]

If we could add fart spray, we could deal some serious payback to the coal-rollers

Ordered

 

[Trbizwiz]

the unit on the left, #607, appears to have made it back from New Zeland (where the fancied decorating the trucks with tape)

appears that leaves a mark...

probably oughta invest in SerVaas Labs, makers of Bar Keepers Friend. That'll clean this stainless right up.

 

[samueldion1]

So... "Letting off some pressure"... I'm sure it was doing something, but I didn't notice a change in suspension height... maybe firmness?

Definitely saw a difference in height-- just click back and forth between the beginning and the end of the video. I just don't think he let it down all the way.

 

[anionic1]

for anyone planning to back in their driveway, it would be really nice if they put a drain hole in the bed near the rear panel so when water gets in there it can drain out. I have a linex bed liner that sealed my bed pretty well and if i back in the water pools near the rearpanel area.

 

[cvalue13]

for anyone planning to back in their driveway, it would be really nice if they put a drain hole in the bed near the rear panel so when water gets in there it can drain out. I have a linex bed liner that sealed my bed pretty well and if i back in the water pools near the rearpanel area.

may just drain into the cracks around that bed floor panel

where it drains *to* is another matter

 

[Kahpernicus]

may just drain into the cracks around that bed floor panel

where it drains *to* is another matter

That's what the extra cover in the diaper is for.

Camping water reservoir.

You heard it here first.

 

[wtibbit]

probably oughta invest in SerVaas Labs, makers of Bar Keepers Friend. That'll clean this stainless right up.

I’ve used Bar Keepers since my USAF days nothing works as well on stainless. Get it from Amazon by the case.

 

[BigAl]

Since you all were talking about it, I’d figured I’d share… memories…

 

[kbolt]

Sometimes pages don't load. And if a post was deleted or whatever, you'll get threads that look unread but doesn't contain new posts.


Of course! Alot of the plastics on the beta trucks would have been placeholders. Now that we're at the RCs they should be getting to the final fitments, even the right kinda of molds and materials instead of one-off samples or prints.

-Crissa

I figured it out. I tried looking at a new thread for me and it wouldn't load due to an error. I opened the same page in incognito and it turns out that I had blocked the OP... so I guess you have intended consequences of blocking people lol

 

[FutureBoy]

I clearly must not be paying enough attention or something. I used to have a few people blocked. But it has been a long time (1 year or more) since I had anyone blocked. Am I just missing all the drama that is going on?

 

[Cybercarlson]

rear bulkhead design has changed significantly. and it's now glossy? what material is that?

This is just a temporary carmorflage.
Look at the lower part, indentions of fingers pushing it down.

Seems to me that the MIDGATE is still a possibility.
They have to have something for presentation day, that has not been leaked before. (;-)

 

[cvalue13]

This is just a temporary carmorflage.
Look at the lower part, indentions of fingers pushing it down.

Nah. That was just an odd grab from the video.

Watching the vid itself, it all makes sense and nothing unusual here - the rear bed finish *is* now kind of glossy everywhere, and that rearward slanted bulkhead doesn’t collect dust like the rest

Sponsored