CyberTW
Well-known member
- Joined
- May 25, 2023
- Threads
- 6
- Messages
- 827
- Reaction score
- 1,615
- Location
- Oregon
- Vehicles
- Tesla Model Y &3
- Occupation
- Firefighter
- Thread starter
- #46
Awesome! Thanks!So here is my take on MY CT. First off I love it and it has been a great vehicle so far. That being said, here are MY issues:
1) Foam below tonneau cover cap was put in with two pieces and leaking into bed at the gap. Minor issue but two hours worth of work to remove, replace(1 single piece), reassmble.
2) Passenger door misaligned and sagging. Pain in the butt to do but was pretty easy. Align, close, realign, close, repeated several times. Used a transmission jack and simple sockets.
3) Loose trim around top of doors. Once again, easy fix, but time consuming having to remove assorted pieces to get to area.
4) Loose hitch cover plastic. Took out the plastic push/turn pieces and replaced with Stainless bolt and wing nut. Plastic pins were loose.
That’s it. Yes dealer would have fixed but didn’t want the truck sitting there for god knows how long. Plus I know it is done to my standards. However the truck is going back to the dealer for a panel that was heavily buffed and has some pretty bad swirls. Dealer agreed. Also my seat has the tendency to shift, like its loose going around turns. And finally, the Windshield washer fluid hose is loose and spraying fluid inside the frunk area.
Like I said dealer would have covered all of these things but I enjoy tinkering with my vehicles.
Final Grades:
Fit and finish- B-
Steering- A+
Performance- A+
Electronics- A+
Battery- B
Battery while towing- C ( I know it takes more energy to move heavier loads!)
Overall Coolness- Off the charts
Sponsored