Tonneau Cover Calibration?

[hgpilot]

When I took delivery my Tonneau cover wasn't working correctly. My delivery-person went into the service menu and clearly navigated to the Tonneau calibration - which quickly addressed the issue. Now - 2 weeks later - it's sticking again. I'm assuming I can't go into the service menu - is this something logging an appointment could resolve - or ideally - be resolved remotely?

Sponsored

 

[rudedawg78]

Manual calibration worked for me when I had your issue:

 

[CyberGus]

• On the vehicle touchscreen, touch Controls > Software.
• Touch and hold Cybertruck logo for several seconds, and then release.
• Type "SERVICE" into the dialog box

https://service.tesla.com/docs/Cybe...UID-ED5F50E2-B262-4837-991E-08D9DA60A801.html

 

[JPfromTCE]

Manual calibration worked for me when I had your issue:

This has never worked for me unfortunately. Always have to put it into service mode and calibrate on the touchscreen.

I am actually starting to believe the issue isn’t the tonneau and my bed may be a smidge off

 

[webwrangler]

Adding to this thread because it seems like the place to say this. My tonneau worked fine at delivery, and for over a year after. At some point on a road trip, the function to fully open or fully close, stopped working. The bed light also failed to come on when the tonneau was opened by holding the button down. I was planning to schedule service when I got home, but I noticed on the screen in the truck that the tonneau button did not say open anymore, but Calibrate. I touched that, told it to do it, and everything is back to normal.

 

[hemiarch]

• On the vehicle touchscreen, touch Controls > Software.
• Touch and hold Cybertruck logo for several seconds, and then release.
• Type "SERVICE" into the dialog box

https://service.tesla.com/docs/Cybe...UID-ED5F50E2-B262-4837-991E-08D9DA60A801.html

This. Just don’t dick around with any settings you don’t fully understand.

 

[CyberGus]

Just don’t dick around with any settings you don’t fully understand.

Well NOW you tell me!

 

[hemiarch]

Well NOW you tell me!

I mean…there is only so much damage you can do I suppose but I don’t do seances either or say candyman in the mirror too often.

 

[CyberGus]

I mean…there is only so much damage you can do I suppose but I don’t do seances either or say candyman in the mirror too often.

It’s just if I limited myself to things I fully understood, I’d never do anything

 

[hemiarch]

It’s just if I limited myself to things I fully understood, I’d never do anything

That’s fair. I wouldn’t be married either. I’ll probably die not fully understanding that…you know?

 

[webwrangler]

This. Just don’t dick around with any settings you don’t fully understand.

If it KNOWS it needs to be calibrated, it offers the option without any dicking around.

 

[hemiarch]

If it KNOWS it needs to be calibrated, it offers the option without any dicking around.

That’s deep man.

 

[HaulingAss]

Manual calibration worked for me when I had your issue:

The instructions are a bit nebulous because they don't specify whether you do a full press and hold, or a half press and hold (the button has a detent with a half press).

Sponsored