cvalue13
Well-known member
- Joined
- Aug 17, 2022
- Threads
- 74
- Messages
- 7,153
- Reaction score
- 13,769
- Location
- Austin, TX
- Vehicles
- F150L
- Occupation
- Fun-employed
I don't know that we disagree much, so much as approach this from a different set of assumptions.I agree that the more aerodynamic/lighter/lower profile combination (1.3-1.8mi/kwh) yield better results than a larger/heavier (.9-1.1mi/kwh) combination. You initially quoted large (aero wise) so that is why I did not agree, most of your examples were not large as proven by the single axle/lower profile and/or streamline configuration.
Absolutely nobody trailers to 0% SOC and very few charge to 100% especially when out on the road so there is no point in telling someone they can go X distance if they use the full capacity of the battery. Seriously who goes to 0% SOC while towing?
I would love to see your initial claims be practically attainable but I just don't think it is viable with a truly large load.
Agree to disagree I guess, but I was just speaking from my experience towing a multitude of different trailer combinations/weights & other large trailer examples online. Most of the examples you presented are only a fraction of the CT tow capacity/capability and extrapolated to 0% SOC.
For practical real world use 80% of full capacity is a much more realistic amount to work off of especially when towing.
For example, your assumption of what I meant by "large" and what you mean by "truly large load."
You sound like you do a lot of towing. Perhaps, for you, something like a 7,500lb trailer (on one end of the spectrum) or a 20' single axel camper isn't "truly large."
But my working assumption, is that a person looking to buy a truck because they desire to regularly and long-distance tow things that you appear to consider "truly large," they're probably all-around best served not purchasing a true 1/2 ton truck (that is, not counting those "1/2 ton" trucks that can be optioned out to operate well within 3/4 ton territory).
Not because a 1/2 ton *cant* do it occasionally (especially if piloted by someone like you). Instead that it begins to look like a buyer expecting that repeated use case isn't choosing the best and safest tool for the job, not that the tool is incapable of doing the job.
So yes, I assume "large" for a squarely 1/2 truck like this (or the Lightning), is more along the lines of what I've shown.
If instead you or others reading this were planning to tow an eg 32" north trail king buds, then reasonable people may disagree that they're choosing the right tool for the job, CT range or not.
ALL THAT SAID, you seem to disagree on that point:
Most of the examples you presented are only a fraction of the CT tow capacity/capability and extrapolated to 0% SOC.
I guess I just don't think a eg 32buds is in the CT's towing "sweet spot" while what I've shown are a "fraction" of the tow capacity, in practical terms.
A GVWR of 9,000lbs on an 11K max is done all the time, sure. Knocking the CT payload down to e.g. 1,100-1,500lbs is done all the time, sure.
But is it done all the time by people who pull that so regularly it makes or breaks what truck they buy?
This particular point seems like goalpost moving to me. I mean, let's either talk in terms of total range or lets talk in terms of your preferred distance between refuels.and extrapolated to 0% SOC.
But seems we were talking in terms of total range, and you just don't like that framing, that's fine.
End of the day, the CT is the equivalent of an ICE F150 with a max fuel capacity of 13 gallons, and squarely 1/2 ton capabilities.
And here's what our helpful conversation has taught me: that last point above means, if someone comes asking if they can tow with it, I'm just going to assume they're not reasonably asking whether they can tow nt32'buds and not have to refuel often.
Sponsored