Cybertruck wrapped like an ICE F-150 🧐 Frunk Open Look (No Tub Installed)

[WHIZZARD OF OZ]

What gives with the mural in the background (?) CYBRBAJA [ Satellite Dish outback on Vault & Lifted? ]

Sponsored

 

[uff_da]

A few impressions I get...

I never thought the CT frunk would be as large as F150. This does appear to be fairly small. Seems to go more with the idea of the overall length was made shorter and cab pushed forward a bit more?

Based on no visible gas shock or actuator, what do we make of the possibility of a powered frunk? At first I thought- dang, no actuator so it must be manual. Then I thought, a manual setup would at least have a gas shock, so maybe the assist/power mech is down at the pivot. Seems to be a large amount of torque to have to design around down at the pivot but it appears to be how they are doing it?

 

[Newton]

id bet $1000 that we see a video of this in a tug of war vs an F150 by the end of august. And to keep it interesting im gonna say it’ll be a Lightning

Any takers?

by the end of this august... thats a bold statement. i would take u up on it if u are actually that confidant.

 

[Mini2nut]

The CT on the right even has the F150 grill wrap on the frunk valance.

I am liking this white marble with dark veining wrap. I think this would great on the CT.

 

[SolarWizard]

The CT on the right even has the F150 grill wrap on the frunk valance.

I am liking this white marble with dark veining wrap. I think this would great on the CT.

The marble looks really sharp and a lot like a lil project I got goin on ?

 

[Mini2nut]

The stamped stiffening section that attaches to the underside of the frunk hood must be steel or aluminum.

https://electrek.co/wp-content/uploads/sites/3/2023/07/Screenshot-2023-07-23-at-6.33.46-PM.jpg

 

[FarAway]

The frunk does seem to be "lacking".
Maybe after a frunk enlargement regiment we can get those lost 6 inches back. ?‍

 

[CyberGus]

The stamped stiffening section that attaches to the underside of the frunk hood must be steel or aluminum.

https://electrek.co/wp-content/uploads/sites/3/2023/07/Screenshot-2023-07-23-at-6.33.46-PM.jpg

A 3mm thick stainless would not need the structural bracing, would it?

 

[windydrew]

That's more space than you think, since it's full width and could be a foot deep below the bumper with a floor cover. That's way more than my MY with the 7 seats up

 

[WHIZZARD OF OZ]

Damn that frunk looks tiny

Funny!
CYBRTRK : 'Does my Frunk look BIG in this?'

 

[charliemagpie]

Might as well go all the way and do a Horse Wrap

 

[WHIZZARD OF OZ]

Might as well go all the way and do a Horse Wrap

Available at Tesla Shop 'The Mister Ed' addition. [ Talkin' CYBERHORSE ]

Sponsored