vn_slcut
New member
- Joined
- Jul 5, 2020
- Threads
- 1
- Messages
- 4
- Reaction score
- 18
- Location
- Salt Lake City
- Vehicles
- 1st gen LEAF
I plan on using the frunk for off-road recovery gear, including semi-permanently mounted compressor. The fitted aluminum plate mounts to the L-track to secure. Remounted the compressor/suction cup feet to between the plate and frunk floor to eliminate wobbles
Replaced the compressor power cord with 9ā and a flat / right angle power patch cord adapter.
Was pleased with the right angle adapter. Just enough slack to make the power from inside work.
The playdoh tower shows clearance to the lid.
About 1.5ā / 40mm Clearance
Impressed with those little dual piston compressors, they are game changers: Compact, efficient, and this one is pretty quiet.
Replaced the compressor power cord with 9ā and a flat / right angle power patch cord adapter.
Was pleased with the right angle adapter. Just enough slack to make the power from inside work.
The playdoh tower shows clearance to the lid.
About 1.5ā / 40mm Clearance
Impressed with those little dual piston compressors, they are game changers: Compact, efficient, and this one is pretty quiet.
Sponsored
