Powered Frunk In Action! Great shots!!

[Sirfun]

Why not hit your head on it and find out

My response is not to debate with you. You seem like a negative Nellie. But, to all others on here. 3mm stainless is pretty thick. Awhile back one the members on this forum made CT shaped bottle openers. I have one on my keyring and I've taken through security checks probably 50 times without a problem.

Sponsored

 

[TacoTuesday]

My response is not to debate with you. You seem like a negative Nellie. But, to all others on here. 3mm stainless is pretty thick. Awhile back one the members on this forum made CT shaped bottle openers. I have one on my keyring and I've taken through security checks probably 50 times without a problem.

Thickness doesn’t matter. If it’s a pointed edge and you move your head with a certain velocity (not even that fast), it’s going to break skin and leave a bad mark.

Rose color glasses much?

 

[Sirfun]

Thickness doesn’t matter. If it’s a pointed edge and you move your head with a certain velocity (not even that fast), it’s going to break skin and leave a bad mark.

Rose color glasses much?

That's it!!!
No Cybertruck for you Ralphie. You'll poke your eye out!

 

[TacoTuesday]

That's it!!!
No Cybertruck for you Ralphie. You'll poke your eye out!

Not planning on buying one, actually

 

[cvalue13]

I was kinda on with my guess!!! Woah

I had guessed 14x16x68 but I am not sure it’s quite that wide. Also the kidney shape subtracts some. I had matched 11cubic but maybe it’s more like 9.5?

I do think it has to be a bit narrower than 68”

the nose of the vehicle is a good bit narrower than the widest point of the truck. Let’s say it’s 4” narrower than a max of 80”. That’s 76”. Of those 76”, ~4” of that is fender flares (where max width is measured). That’s 72”, from outside sheet metal, up at the nose.

then see:

that’s seems at *least* 5” from sheet metal exterior to Frunk wall, so a total of 10” less of 72” or 62” or less

If that were a box with flat sides, we’re talking ~16”X18”X60” or ~8.75ft^3

so, factoring in the curves, sloping height, etc., say ~8cuft?

Again, ~60% of Lightning Frunk give or take

any guestimate better than that would require CAD ?

 

[cvalue13]

My response is not to debate with you. You seem like a negative Nellie. But, to all others on here. 3mm stainless is pretty thick. Awhile back one the members on this forum made CT shaped bottle openers. I have one on my keyring and I've taken through security checks probably 50 times without a problem.

but no one’s talking about slicing eg tomatoes with it

they’re obviously talking about blunt force

you also can’t slice tomatoes with this

 

[IronStation]

but no one’s talking about slicing eg tomatoes with it

they’re obviously talking about blunt force

you also can’t slice tomatoes with this

For a second, I thought your pic was some Jarts. Nothing was more interesting than watching some drunk adults at a party playing with these babies in the 70's

 

[CyberGus]

IMO, the frunk is disappointingly small for such a massive vehicle. I feel like this wouldn't even fit a full load of groceries.

Damn son, how much do you eat??

 

[cvalue13]

For a second, I thought your pic was some Jarts. Nothing was more interesting than watching some drunk adults at a party playing with these babies in the 70's

I remember it well

also don’t slice tomatos

 

[CyberGus]

Not planning on buying one, actually

Welcome to the forum! And, gtfo

 

[CyberSleuth]

It really does give off hungry hungry hippo vibes.

Next Halloween, this will be my frunk:

 

[Unemployed]

Why does the video stutter? Seems suss

 

[scottf200]

Why does the video stutter? Seems suss

asked and answered ... it is not a video but a gif.

https://www.cybertruckownersclub.co...in-action-great-shots.9614/page-4#post-190193

 

[Mini2nut]

I thought it was another potato phone video.

 

[IronStation]

Welcome to the forum! And, gtfo

Could be leasing?

Sponsored